This series adds support for: - SERDES, WIZ DT nodes, Serdes lane control mux - MAIN CPSW2G nodes - DSS and DisplayPort-0 nodes This series depends on DMA support patches for J784S4[1] which are applied to linux-next. DisplayPort has been tested on local J784S4 EVM. Test log: <https://gist.github.com/Jayesh2000/3ba5a45b6e82f0c5c98d2e8fad56cb52> Changelog v1->v2: - Moved J784S4 EVM changes together to the last patch (Suggested by Andrew[2]) v1 patch link: <https://lore.kernel.org/all/20230405111412.151192-1-j-choudhary@xxxxxx/> [1]: <https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=00e34c94987e4fe866f12ad8eac17268c936880c> <https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=82e6051a48957a89066d15b17bb85d2f662f2bad> <https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=436b288687176bf4d2c1cd25b86173e5a1649a60> [2]: <https://lore.kernel.org/all/e38ea0b2-5e51-05d6-50fc-c7ef3d4b8698@xxxxxx/> Rahul T R (2): arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 Siddharth Vadapalli (3): arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux arm64: dts: ti: k3-j784s4: Add Main CPSW2G node arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 164 ++++++++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 338 +++++++++++++++++++++ 2 files changed, 502 insertions(+) -- 2.25.1
