From: Thierry Reding <treding@xxxxxxxxxx> Hi, this set of patches removes the registration of the SOCTHERM internal throttling mechanism as cooling device. Since this throttling starts automatically once a certain temperature threshold is crossed, it doesn't make sense to represent it as a cooling device, which are typically "manually" activated by the thermal framework when thermal sensors report temperature thresholds being crossed. Instead of using the cooling device mechanism, this statically programs the throttling mechanism when it is configured in device tree. In order to do this, an additional device tree property is needed to replace the information that was previously contained in trip points. There's a few preparatory patches to make the removal a bit simpler and also some follow up cleanups included as well. Thierry Thierry Reding (10): dt-bindings: thermal: tegra: Document throttle temperature thermal: tegra: Use driver-private data consistently thermal: tegra: Constify SoC-specific data thermal: tegra: Do not register cooling device thermal: tegra: Use unsigned int where appropriate thermal: tegra: Avoid over-allocation of temporary array thermal: tegra: Remove gratuitous error assignment thermal: tegra: Minor stylistic cleanups arm64: tegra: Rework SOCTHERM on Tegra132 and Tegra210 ARM: tegra: Rework SOCTHERM on Tegra124 .../thermal/nvidia,tegra124-soctherm.yaml | 7 + arch/arm/boot/dts/tegra124.dtsi | 65 +-- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 63 +-- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 83 +--- drivers/thermal/tegra/soctherm.c | 392 ++++++------------ drivers/thermal/tegra/soctherm.h | 1 + drivers/thermal/tegra/tegra124-soctherm.c | 4 + drivers/thermal/tegra/tegra132-soctherm.c | 4 + drivers/thermal/tegra/tegra210-soctherm.c | 4 + 9 files changed, 208 insertions(+), 415 deletions(-) -- 2.40.0
