Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x chips. The functionality will be provided by the exisintg pca954x driver. While on it make the interrupts support conditionally as not all of the existing chips have interrupts. For chips that are powered off by default add an optional regulator called vdd-supply. Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> --- .../bindings/i2c/i2c-mux-pca954x.yaml | 45 ++++++++++++++++--- 1 file changed, 39 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml index 9f1726d0356b..6fed6eae9c9b 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml @@ -4,21 +4,29 @@ $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP PCA954x I2C bus switch +title: NXP PCA954x I2C and compatible bus switches maintainers: - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> description: - The binding supports NXP PCA954x and PCA984x I2C mux/switch devices. - -allOf: - - $ref: /schemas/i2c/i2c-mux.yaml# + The NXP PCA954x and compatible devices are I2C bus + multiplexer/switches that share the same functionality + and register layout. + The devices usually have 4 or 8 child buses, which are + attached to the parent bus by using the SMBus "Send Byte" + command. properties: compatible: oneOf: - enum: + - maxim,max7356 + - maxim,max7357 + - maxim,max7358 + - maxim,max7367 + - maxim,max7368 + - maxim,max7369 - nxp,pca9540 - nxp,pca9542 - nxp,pca9543 @@ -59,10 +67,33 @@ properties: description: if present, overrides i2c-mux-idle-disconnect $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state + vdd-supply: + description: A voltage regulator supplying power to the chip. + required: - compatible - reg +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - maxim,max7367 + - maxim,max7369 + - nxp,pca9542 + - nxp,pca9543 + - nxp,pca9544 + - nxp,pca9545 + then: + properties: + interrupts: false + "#interrupt-cells": false + interrupt-controller: false + unevaluatedProperties: false examples: @@ -74,11 +105,13 @@ examples: #size-cells = <0>; i2c-mux@74 { - compatible = "nxp,pca9548"; + compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; reg = <0x74>; + vdd-supply = <&p3v3>; + interrupt-parent = <&ipic>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; -- 2.39.2
