Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 14.04.2023 12:01, Devi Priya wrote:
> 
> 
> On 4/13/2023 2:16 AM, Konrad Dybcio wrote:
>>
>>
>> On 10.04.2023 15:59, Devi Priya wrote:
>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>> family of SoCs
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
>>> Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
>>> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
>>> ---
>>
>>> +    soc: soc@0 {
>>> +        compatible = "simple-bus";
>>> +        #address-cells = <1>;
>>> +        #size-cells = <1>;
>>> +        ranges = <0 0 0 0xffffffff>;
>> this is equal to:
>>
>> ranges;
> 
> Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;)
> we see the below warnings:
> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
> /soc@0:ranges: empty "ranges" property but its #address-cells (1)
> differs from / (2)
> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs
> from / (2)
> 
> Looks like, empty ranges property isn't supported if the parent and
> child address spaces are non-identical.
> Would you suggest to retain the ranges as such?
> (ranges = <0 0 0 0xffffffff>;)
> 
> Thanks,
> Devi Priya
Oh right, you have address/size cells = 2 at the top level.
Forget about this change.

Konrad
>>
>> Could you fix that up when applying, Bjorn, should there be
>> no other issues?
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>
> Thank you!
>> Konrad
>>
>>> +
>>> +        tlmm: pinctrl@1000000 {
>>> +            compatible = "qcom,ipq9574-tlmm";
>>> +            reg = <0x01000000 0x300000>;
>>> +            interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> +            gpio-controller;
>>> +            #gpio-cells = <2>;
>>> +            gpio-ranges = <&tlmm 0 0 65>;
>>> +            interrupt-controller;
>>> +            #interrupt-cells = <2>;
>>> +
>>> +            uart2_pins: uart2-state {
>>> +                pins = "gpio34", "gpio35";
>>> +                function = "blsp2_uart";
>>> +                drive-strength = <8>;
>>> +                bias-disable;
>>> +            };
>>> +        };
>>> +
>>> +        gcc: clock-controller@1800000 {
>>> +            compatible = "qcom,ipq9574-gcc";
>>> +            reg = <0x01800000 0x80000>;
>>> +            clocks = <&xo_board_clk>,
>>> +                 <&sleep_clk>,
>>> +                 <0>,
>>> +                 <0>,
>>> +                 <0>,
>>> +                 <0>,
>>> +                 <0>;
>>> +            #clock-cells = <1>;
>>> +            #reset-cells = <1>;
>>> +            #power-domain-cells = <1>;
>>> +        };
>>> +
>>> +        sdhc_1: mmc@7804000 {
>>> +            compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
>>> +            reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
>>> +            reg-names = "hc", "cqhci";
>>> +
>>> +            interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>>> +                     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>>> +            interrupt-names = "hc_irq", "pwr_irq";
>>> +
>>> +            clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>> +                 <&gcc GCC_SDCC1_APPS_CLK>,
>>> +                 <&xo_board_clk>;
>>> +            clock-names = "iface", "core", "xo";
>>> +            non-removable;
>>> +            status = "disabled";
>>> +        };
>>> +
>>> +        blsp1_uart2: serial@78b1000 {
>>> +            compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>> +            reg = <0x078b1000 0x200>;
>>> +            interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
>>> +            clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
>>> +                 <&gcc GCC_BLSP1_AHB_CLK>;
>>> +            clock-names = "core", "iface";
>>> +            status = "disabled";
>>> +        };
>>> +
>>> +        intc: interrupt-controller@b000000 {
>>> +            compatible = "qcom,msm-qgic2";
>>> +            reg = <0x0b000000 0x1000>,  /* GICD */
>>> +                  <0x0b002000 0x2000>,  /* GICC */
>>> +                  <0x0b001000 0x1000>,  /* GICH */
>>> +                  <0x0b004000 0x2000>;  /* GICV */
>>> +            #address-cells = <1>;
>>> +            #size-cells = <1>;
>>> +            interrupt-controller;
>>> +            #interrupt-cells = <3>;
>>> +            interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>>> +            ranges = <0 0x0b00c000 0x3000>;
>>> +
>>> +            v2m0: v2m@0 {
>>> +                compatible = "arm,gic-v2m-frame";
>>> +                reg = <0x00000000 0xffd>;
>>> +                msi-controller;
>>> +            };
>>> +
>>> +            v2m1: v2m@1000 {
>>> +                compatible = "arm,gic-v2m-frame";
>>> +                reg = <0x00001000 0xffd>;
>>> +                msi-controller;
>>> +            };
>>> +
>>> +            v2m2: v2m@2000 {
>>> +                compatible = "arm,gic-v2m-frame";
>>> +                reg = <0x00002000 0xffd>;
>>> +                msi-controller;
>>> +            };
>>> +        };
>>> +
>>> +        timer@b120000 {
>>> +            compatible = "arm,armv7-timer-mem";
>>> +            reg = <0x0b120000 0x1000>;
>>> +            #address-cells = <1>;
>>> +            #size-cells = <1>;
>>> +            ranges;
>>> +
>>> +            frame@b120000 {
>>> +                reg = <0x0b121000 0x1000>,
>>> +                      <0x0b122000 0x1000>;
>>> +                frame-number = <0>;
>>> +                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> +                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> +            };
>>> +
>>> +            frame@b123000 {
>>> +                reg = <0x0b123000 0x1000>;
>>> +                frame-number = <1>;
>>> +                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@b124000 {
>>> +                reg = <0x0b124000 0x1000>;
>>> +                frame-number = <2>;
>>> +                interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@b125000 {
>>> +                reg = <0x0b125000 0x1000>;
>>> +                frame-number = <3>;
>>> +                interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@b126000 {
>>> +                reg = <0x0b126000 0x1000>;
>>> +                frame-number = <4>;
>>> +                interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@b127000 {
>>> +                reg = <0x0b127000 0x1000>;
>>> +                frame-number = <5>;
>>> +                interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +
>>> +            frame@b128000 {
>>> +                reg = <0x0b128000 0x1000>;
>>> +                frame-number = <6>;
>>> +                interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> +                status = "disabled";
>>> +            };
>>> +        };
>>> +    };
>>> +
>>> +    timer {
>>> +        compatible = "arm,armv8-timer";
>>> +        interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>> +                 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>>> +    };
>>> +};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux