On 4/14/2023 12:24 AM, Adrien Thierry wrote:
Hi,Krishna Kurapati (8): dt-bindings: usb: Add bindings for multiport properties on DWC3 controller usb: dwc3: core: Access XHCI address space temporarily to read port info usb: dwc3: core: Skip setting event buffers for host only controllers usb: dwc3: core: Refactor PHY logic to support Multiport Controller usb: dwc3: qcom: Add multiport controller support for qcom wrapper arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller .../devicetree/bindings/usb/snps,dwc3.yaml | 13 +- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 +++ arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++ arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 58 +++ drivers/usb/dwc3/core.c | 373 ++++++++++++++---- drivers/usb/dwc3/core.h | 71 +++- drivers/usb/dwc3/drd.c | 13 +- drivers/usb/dwc3/dwc3-qcom.c | 28 +- 8 files changed, 523 insertions(+), 102 deletions(-)I tested this series on the sa8540p-ride, with a USB Ethernet adapter plugged into the board. The device shows up as expected: # lsusb -tv /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 10000M ID 1d6b:0003 Linux Foundation 3.0 root hub |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/4p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub Tested-by: Adrien Thierry <athierry@xxxxxxxxxx> # sa8540p-ride
Hi Adrien, Thanks for testing out the patches. Regards, Krishna,
