Add the BMA255 Accelerometer on I2C3 and its pin definitions.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
.../boot/dts/mediatek/mt6795-sony-xperia-m5.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index 155a573eac4c..0b0519f6b2f1 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -68,6 +68,13 @@ &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
+
+ accelerometer@10 {
+ compatible = "bosch,bma255";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_pins>;
+ };
};
&i2c2 {
@@ -247,6 +254,14 @@ pins-irq {
};
};
+ accel_pins: accelerometer-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
i2c0_pins: i2c0-pins {
pins-bus {
pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
--
2.40.0
