Add dphy rx node for the StarFive JH7110 SoC. It is used to transfer CSI
camera data.
Signed-off-by: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 3179b5698329..dc51e2199ac4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -573,6 +573,20 @@ ispcrg: clock-controller@19810000 {
power-domains = <&pwrc JH7110_PD_ISP>;
};
+ csi_phy: phy@19820000 {
+ compatible = "starfive,jh7110-dphy-rx";
+ reg = <0x0 0x19820000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>;
+ clock-names = "cfg", "ref", "tx";
+ resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+ <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>;
+ power-domains = <&pwrc_dphy JH7110_PD_DPHY_RX>;
+ lane_maps = /bits/ 8 <4 0 1 2 3 5>;
+ #phy-cells = <0>;
+ };
+
voutcrg: clock-controller@295c0000 {
compatible = "starfive,jh7110-voutcrg";
reg = <0x0 0x295c0000 0x0 0x10000>;
--
2.25.1
