On 2023/4/11 9:01, Peter Chen wrote: > On 23-04-06 09:52:15, Minda Chen wrote: >> Adds Specific Glue layer to support USB peripherals on >> StarFive JH7110 SoC. >> There is a Cadence USB3 core for JH7110 SoCs, the cdns >> core is the child of this USB wrapper module device. >> >> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> >> --- >> MAINTAINERS | 7 + >> drivers/usb/cdns3/Kconfig | 11 + >> drivers/usb/cdns3/Makefile | 1 + >> drivers/usb/cdns3/cdns3-starfive.c | 378 +++++++++++++++++++++++++++++ >> drivers/usb/cdns3/core.h | 3 + >> 5 files changed, 400 insertions(+) >> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index d98b70d62fd4..0610bbf921bb 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -19977,6 +19977,13 @@ F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> F: drivers/phy/starfive/phy-jh7110-pcie.c >> F: drivers/phy/starfive/phy-jh7110-usb.c >> >> +STARFIVE JH71X0 USB DRIVERS >> +M: Emil Renner Berthing <kernel@xxxxxxxx> >> +M: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> >> +S: Maintained >> +F: Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml >> +F: drivers/usb/cdns3/cdns3-starfive.c >> + >> STATIC BRANCH/CALL >> M: Peter Zijlstra <peterz@xxxxxxxxxxxxx> >> M: Josh Poimboeuf <jpoimboe@xxxxxxxxxx> >> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig >> index b98ca0a1352a..0a514b591527 100644 >> --- a/drivers/usb/cdns3/Kconfig >> +++ b/drivers/usb/cdns3/Kconfig >> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX >> >> For example, imx8qm and imx8qxp. >> >> +config USB_CDNS3_STARFIVE >> + tristate "Cadence USB3 support on StarFive SoC platforms" >> + depends on ARCH_STARFIVE || COMPILE_TEST >> + help >> + Say 'Y' or 'M' here if you are building for StarFive SoCs >> + platforms that contain Cadence USB3 controller core. >> + >> + e.g. JH7110. >> + >> + If you choose to build this driver as module it will >> + be dynamically linked and module will be called cdns3-starfive.ko >> endif >> >> if USB_CDNS_SUPPORT >> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile >> index 61edb2f89276..48dfae75b5aa 100644 >> --- a/drivers/usb/cdns3/Makefile >> +++ b/drivers/usb/cdns3/Makefile >> @@ -24,6 +24,7 @@ endif >> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o >> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o >> obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o >> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o >> >> cdnsp-udc-pci-y := cdnsp-pci.o >> >> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c >> new file mode 100644 >> index 000000000000..925209a97bf9 >> --- /dev/null >> +++ b/drivers/usb/cdns3/cdns3-starfive.c >> @@ -0,0 +1,378 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/** >> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller >> + * >> + * Copyright (C) 2022 Starfive, Inc. >> + * Author: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx> >> + * Author: Mason Huo <mason.huo@xxxxxxxxxxxxxxxx> >> + * Author: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> >> + */ >> + >> +#include <linux/bits.h> >> +#include <linux/clk.h> >> +#include <linux/module.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/kernel.h> >> +#include <linux/platform_device.h> >> +#include <linux/io.h> >> +#include <linux/of_platform.h> >> +#include <linux/regmap.h> >> +#include <linux/reset.h> >> +#include <linux/usb/otg.h> >> +#include "core.h" >> + >> +#define USB_STRAP_HOST BIT(17) >> +#define USB_STRAP_DEVICE BIT(18) >> +#define USB_STRAP_MASK GENMASK(18, 16) >> + >> +#define USB_SUSPENDM_HOST BIT(19) >> +#define USB_SUSPENDM_MASK BIT(19) >> +#define CDNS_IRQ_WAKEUP_INDEX 3 >> + >> +struct cdns_starfive { >> + struct device *dev; >> + struct phy *usb2_phy; >> + struct phy *usb3_phy; >> + struct regmap *stg_syscon; >> + struct reset_control *resets; >> + struct clk_bulk_data *clks; >> + int num_clks; >> + enum phy_mode phy_mode; >> + u32 stg_usb_mode; >> +}; >> + >> +static int set_phy_power_on(struct cdns_starfive *data) >> +{ >> + int ret; >> + >> + ret = phy_power_on(data->usb2_phy); >> + if (ret) >> + return ret; >> + >> + ret = phy_power_on(data->usb3_phy); >> + if (ret) >> + phy_power_off(data->usb2_phy); >> + >> + return ret; >> +} >> + >> +static void set_phy_power_off(struct cdns_starfive *data) >> +{ >> + phy_power_off(data->usb3_phy); >> + phy_power_off(data->usb2_phy); >> +} >> + >> +static void cdns_mode_init(struct platform_device *pdev, >> + struct cdns_starfive *data) >> +{ >> + enum usb_dr_mode mode; >> + >> + mode = usb_get_dr_mode(&pdev->dev); >> + >> + switch (mode) { >> + case USB_DR_MODE_HOST: >> + regmap_update_bits(data->stg_syscon, >> + data->stg_usb_mode, >> + USB_STRAP_MASK, >> + USB_STRAP_HOST); >> + regmap_update_bits(data->stg_syscon, >> + data->stg_usb_mode, >> + USB_SUSPENDM_MASK, >> + USB_SUSPENDM_HOST); >> + data->phy_mode = PHY_MODE_USB_HOST; >> + break; >> + >> + case USB_DR_MODE_PERIPHERAL: >> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode, >> + USB_STRAP_MASK, USB_STRAP_DEVICE); >> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode, >> + USB_SUSPENDM_MASK, 0); >> + data->phy_mode = PHY_MODE_USB_DEVICE; >> + break; >> + >> + case USB_DR_MODE_OTG: >> + data->phy_mode = PHY_MODE_USB_OTG; >> + default: >> + break; >> + } >> +} >> + >> +static int cdns_clk_rst_init(struct cdns_starfive *data) >> +{ >> + int ret; >> + >> + data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks); >> + if (data->num_clks < 0) >> + return dev_err_probe(data->dev, -ENODEV, >> + "Failed to get clocks\n"); >> + >> + data->resets = devm_reset_control_array_get_exclusive(data->dev); >> + if (IS_ERR(data->resets)) { >> + return dev_err_probe(data->dev, PTR_ERR(data->resets), >> + "Failed to get resets"); >> + } >> + >> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks); >> + if (ret) >> + return dev_err_probe(data->dev, ret, >> + "failed to enable clocks\n"); >> + >> + ret = reset_control_deassert(data->resets); >> + if (ret) { >> + ret = dev_err_probe(data->dev, ret, >> + "failed to reset clocks\n"); >> + goto err_clk_init; >> + } >> + >> + return ret; >> + >> +err_clk_init: >> + clk_bulk_disable_unprepare(data->num_clks, data->clks); >> + return ret; >> +} >> + >> +static int cdns3_starfive_phy_init(struct device *dev, struct cdns_starfive *data) >> +{ >> + int ret; >> + >> + ret = phy_init(data->usb2_phy); >> + if (ret) >> + return ret; >> + >> + ret = phy_init(data->usb3_phy); >> + if (ret) >> + goto err_phy3_init; >> + >> + ret = set_phy_power_on(data); >> + if (ret) >> + goto err_phy_power_on; >> + >> + phy_set_mode(data->usb2_phy, data->phy_mode); >> + phy_set_mode(data->usb3_phy, data->phy_mode); >> + >> + return 0; >> + >> +err_phy_power_on: >> + phy_exit(data->usb3_phy); >> +err_phy3_init: >> + phy_exit(data->usb2_phy); >> + return ret; >> +} >> + >> +static int cdns3_starfive_platform_device_add(struct platform_device *pdev, >> + struct cdns_starfive *data) >> +{ >> + struct platform_device *cdns3; >> + struct resource cdns_res[CDNS_RESOURCES_NUM], *res; >> + struct device *dev = &pdev->dev; >> + const char *reg_name[CDNS_IOMEM_RESOURCES_NUM] = {"otg", "xhci", "dev"}; >> + const char *irq_name[CDNS_IRQ_RESOURCES_NUM] = {"host", "peripheral", "otg", "wakeup"}; >> + int i, ret, res_idx = 0; >> + >> + cdns3 = platform_device_alloc("cdns-usb3", PLATFORM_DEVID_AUTO); >> + if (!cdns3) >> + return dev_err_probe(dev, -ENOMEM, >> + "couldn't alloc cdns3 usb device\n"); >> + >> + cdns3->dev.parent = dev; >> + memset(cdns_res, 0, sizeof(cdns_res)); >> + >> + for (i = 0; i < CDNS_IOMEM_RESOURCES_NUM; i++) { >> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, reg_name[i]); >> + if (!res) { >> + ret = dev_err_probe(dev, >> + -ENXIO, "couldn't get %s reg resource\n", reg_name[i]); >> + goto free_memory; >> + } >> + cdns_res[res_idx] = *res; >> + res_idx++; >> + } >> + >> + for (i = 0; i < CDNS_IRQ_RESOURCES_NUM; i++) { >> + if (i == CDNS_IRQ_WAKEUP_INDEX) { >> + ret = platform_get_irq_byname_optional(pdev, irq_name[i]); >> + if (ret < 0) >> + continue; >> + } else { >> + ret = platform_get_irq_byname(pdev, irq_name[i]); >> + if (ret < 0) { >> + dev_err(dev, "couldn't get %s irq\n", irq_name[i]); >> + goto free_memory; >> + } >> + } >> + cdns_res[res_idx].start = ret; >> + cdns_res[res_idx].end = ret; >> + cdns_res[res_idx].flags = IORESOURCE_IRQ; >> + cdns_res[res_idx].name = irq_name[i]; >> + res_idx++; >> + } >> + >> + ret = platform_device_add_resources(cdns3, cdns_res, res_idx); >> + if (ret) { >> + dev_err(dev, "couldn't add res to cdns3 device\n"); >> + goto free_memory; >> + } >> + >> + ret = platform_device_add(cdns3); >> + if (ret) { >> + dev_err(dev, "failed to register cdns3 device\n"); >> + goto free_memory; >> + } >> + >> + return ret; >> +free_memory: >> + platform_device_put(cdns3); >> + return ret; >> +} >> + >> +static int cdns_starfive_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct cdns_starfive *data; >> + unsigned int args; >> + int ret; >> + >> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); >> + if (!data) >> + return -ENOMEM; >> + >> + platform_set_drvdata(pdev, data); >> + >> + data->dev = dev; >> + >> + data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node, >> + "starfive,stg-syscon", 1, &args); >> + >> + if (IS_ERR(data->stg_syscon)) >> + return dev_err_probe(dev, PTR_ERR(data->stg_syscon), >> + "Failed to parse starfive,stg-syscon\n"); >> + >> + data->stg_usb_mode = args; >> + >> + cdns_mode_init(pdev, data); >> + >> + ret = cdns_clk_rst_init(data); >> + if (ret) >> + return ret; >> + >> + data->usb2_phy = devm_phy_optional_get(dev, "usb2-phy"); >> + if (IS_ERR(data->usb2_phy)) >> + return dev_err_probe(dev, PTR_ERR(data->usb2_phy), >> + "Failed to parse usb2 phy\n"); >> + >> + data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); >> + if (IS_ERR(data->usb3_phy)) >> + return dev_err_probe(dev, PTR_ERR(data->usb3_phy), >> + "Failed to parse usb3 phy\n"); >> + > > You may not change the comment for if above functions are failed, there > is not opposite functions for clk and reset. > > Others are okay for me. > > Peter > OK, I will change this. Thank you very much. >> + cdns3_starfive_phy_init(dev, data); >> + >> + ret = cdns3_starfive_platform_device_add(pdev, data); >> + if (ret) { >> + set_phy_power_off(data); >> + phy_exit(data->usb3_phy); >> + phy_exit(data->usb2_phy); >> + reset_control_assert(data->resets); >> + clk_bulk_disable_unprepare(data->num_clks, data->clks); >> + return dev_err_probe(dev, ret, "Failed to create children\n"); >> + } >> + >> + device_set_wakeup_capable(dev, true); >> + pm_runtime_set_active(dev); >> + pm_runtime_enable(dev); >> + >> + dev_info(dev, "usb mode %d probe success\n", data->phy_mode); >> + >> + return 0; >> +} >> + >> +static int cdns_starfive_remove_core(struct device *dev, void *c) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + >> + platform_device_unregister(pdev); >> + >> + return 0; >> +} >> + >> +static int cdns_starfive_remove(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct cdns_starfive *data = dev_get_drvdata(dev); >> + >> + pm_runtime_get_sync(dev); >> + device_for_each_child(dev, NULL, cdns_starfive_remove_core); >> + >> + set_phy_power_off(data); >> + phy_exit(data->usb2_phy); >> + phy_exit(data->usb3_phy); >> + >> + reset_control_assert(data->resets); >> + clk_bulk_disable_unprepare(data->num_clks, data->clks); >> + pm_runtime_disable(dev); >> + pm_runtime_put_noidle(dev); >> + platform_set_drvdata(pdev, NULL); >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_PM >> +static int cdns_starfive_resume(struct device *dev) >> +{ >> + struct cdns_starfive *data = dev_get_drvdata(dev); >> + int ret; >> + >> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks); >> + if (ret) >> + return ret; >> + >> + ret = reset_control_deassert(data->resets); >> + if (ret) >> + return ret; >> + >> + ret = cdns3_starfive_phy_init(dev, data); >> + >> + return ret; >> +} >> + >> +static int cdns_starfive_suspend(struct device *dev) >> +{ >> + struct cdns_starfive *data = dev_get_drvdata(dev); >> + >> + set_phy_power_off(data); >> + phy_exit(data->usb2_phy); >> + phy_exit(data->usb3_phy); >> + reset_control_assert(data->resets); >> + clk_bulk_disable_unprepare(data->num_clks, data->clks); >> + >> + return 0; >> +} >> +#endif >> + >> +static const struct dev_pm_ops cdns_starfive_pm_ops = { >> + SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL) >> + SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume) >> +}; >> + >> +static const struct of_device_id cdns_starfive_of_match[] = { >> + { .compatible = "starfive,jh7110-usb", }, >> + { /* sentinel */ } >> +}; >> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match); >> + >> +static struct platform_driver cdns_starfive_driver = { >> + .probe = cdns_starfive_probe, >> + .remove = cdns_starfive_remove, >> + .driver = { >> + .name = "cdns3-starfive", >> + .of_match_table = cdns_starfive_of_match, >> + .pm = &cdns_starfive_pm_ops, >> + }, >> +}; >> +module_platform_driver(cdns_starfive_driver); >> + >> +MODULE_ALIAS("platform:cdns3-starfive"); >> +MODULE_AUTHOR("YanHong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>"); >> +MODULE_AUTHOR("Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>"); >> +MODULE_LICENSE("GPL v2"); >> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer"); >> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h >> index 2d332a788871..8d44ab504898 100644 >> --- a/drivers/usb/cdns3/core.h >> +++ b/drivers/usb/cdns3/core.h >> @@ -38,6 +38,9 @@ struct cdns_role_driver { >> }; >> >> #define CDNS_XHCI_RESOURCES_NUM 2 >> +#define CDNS_IOMEM_RESOURCES_NUM 3 >> +#define CDNS_IRQ_RESOURCES_NUM 4 >> +#define CDNS_RESOURCES_NUM (CDNS_IOMEM_RESOURCES_NUM + CDNS_IRQ_RESOURCES_NUM) >> >> struct cdns3_platform_data { >> int (*platform_suspend)(struct device *dev, >> -- >> 2.17.1 >> >