On 2023/4/12 4:26, Conor Dooley wrote:
> On Mon, Apr 10, 2023 at 11:47:39PM -0700, Changhuang Liang wrote:
>> Modify ioremap to regmap, easy to simplify code.
>
> This doesn't simplify anything, adding regmap to the mix actually makes
> it less obvious what is going on here & it's not even fewer LoC:
> 1 file changed, 23 insertions(+), 20 deletions(-)
>
> Please write a commit message that explains the real motivation for
> this change.
>
> Thanks,
> Conor.
>
When a new pmu is introduced later, they can use the same member
"struct regmap *base" in "struct jh71xx_pmu". I will add more
commit message later.
>>
>> Signed-off-by: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
>> ---
>> drivers/soc/starfive/jh71xx_pmu.c | 43 +++++++++++++++++--------------
>> 1 file changed, 23 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/soc/starfive/jh71xx_pmu.c b/drivers/soc/starfive/jh71xx_pmu.c
>> index 7d5f50d71c0d..306218c83691 100644
>> --- a/drivers/soc/starfive/jh71xx_pmu.c
>> +++ b/drivers/soc/starfive/jh71xx_pmu.c
>> @@ -6,13 +6,13 @@
>> */
>>
>> #include <linux/interrupt.h>
>> -#include <linux/io.h>
>> -#include <linux/iopoll.h>
>> +#include <linux/mfd/syscon.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> #include <linux/of_device.h>
>> #include <linux/platform_device.h>
>> #include <linux/pm_domain.h>
>> +#include <linux/regmap.h>
>> #include <dt-bindings/power/starfive,jh7110-pmu.h>
>>
>> /* register offset */
>> @@ -59,7 +59,7 @@ struct jh71xx_pmu_match_data {
>> struct jh71xx_pmu {
>> struct device *dev;
>> const struct jh71xx_pmu_match_data *match_data;
>> - void __iomem *base;
>> + struct regmap *base;
>> struct generic_pm_domain **genpd;
>> struct genpd_onecell_data genpd_data;
>> int irq;
>> @@ -75,11 +75,14 @@ struct jh71xx_pmu_dev {
>> static int jh71xx_pmu_get_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool *is_on)
>> {
>> struct jh71xx_pmu *pmu = pmd->pmu;
>> + unsigned int val;
>>
>> if (!mask)
>> return -EINVAL;
>>
>> - *is_on = readl(pmu->base + JH71XX_PMU_CURR_POWER_MODE) & mask;
>> + regmap_read(pmu->base, JH71XX_PMU_CURR_POWER_MODE, &val);
>> +
>> + *is_on = val & mask;
>>
>> return 0;
>> }
>> @@ -130,7 +133,7 @@ static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
>> encourage_hi = JH71XX_PMU_SW_ENCOURAGE_DIS_HI;
>> }
>>
>> - writel(mask, pmu->base + mode);
>> + regmap_write(pmu->base, mode, mask);
>>
>> /*
>> * 2.Write SW encourage command sequence to the Software Encourage Reg (offset 0x44)
>> @@ -140,21 +143,21 @@ static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
>> * Then write the lower bits of the command sequence, followed by the upper
>> * bits. The sequence differs between powering on & off a domain.
>> */
>> - writel(JH71XX_PMU_SW_ENCOURAGE_ON, pmu->base + JH71XX_PMU_SW_ENCOURAGE);
>> - writel(encourage_lo, pmu->base + JH71XX_PMU_SW_ENCOURAGE);
>> - writel(encourage_hi, pmu->base + JH71XX_PMU_SW_ENCOURAGE);
>> + regmap_write(pmu->base, JH71XX_PMU_SW_ENCOURAGE, JH71XX_PMU_SW_ENCOURAGE_ON);
>> + regmap_write(pmu->base, JH71XX_PMU_SW_ENCOURAGE, encourage_lo);
>> + regmap_write(pmu->base, JH71XX_PMU_SW_ENCOURAGE, encourage_hi);
>>
>> spin_unlock_irqrestore(&pmu->lock, flags);
>>
>> /* Wait for the power domain bit to be enabled / disabled */
>> if (on) {
>> - ret = readl_poll_timeout_atomic(pmu->base + JH71XX_PMU_CURR_POWER_MODE,
>> - val, val & mask,
>> - 1, JH71XX_PMU_TIMEOUT_US);
>> + ret = regmap_read_poll_timeout_atomic(pmu->base, JH71XX_PMU_CURR_POWER_MODE,
>> + val, val & mask,
>> + 1, JH71XX_PMU_TIMEOUT_US);
>> } else {
>> - ret = readl_poll_timeout_atomic(pmu->base + JH71XX_PMU_CURR_POWER_MODE,
>> - val, !(val & mask),
>> - 1, JH71XX_PMU_TIMEOUT_US);
>> + ret = regmap_read_poll_timeout_atomic(pmu->base, JH71XX_PMU_CURR_POWER_MODE,
>> + val, !(val & mask),
>> + 1, JH71XX_PMU_TIMEOUT_US);
>> }
>>
>> if (ret) {
>> @@ -190,14 +193,14 @@ static void jh71xx_pmu_int_enable(struct jh71xx_pmu *pmu, u32 mask, bool enable)
>> unsigned long flags;
>>
>> spin_lock_irqsave(&pmu->lock, flags);
>> - val = readl(pmu->base + JH71XX_PMU_TIMER_INT_MASK);
>> + regmap_read(pmu->base, JH71XX_PMU_TIMER_INT_MASK, &val);
>>
>> if (enable)
>> val &= ~mask;
>> else
>> val |= mask;
>>
>> - writel(val, pmu->base + JH71XX_PMU_TIMER_INT_MASK);
>> + regmap_write(pmu->base, JH71XX_PMU_TIMER_INT_MASK, val);
>> spin_unlock_irqrestore(&pmu->lock, flags);
>> }
>>
>> @@ -206,7 +209,7 @@ static irqreturn_t jh71xx_pmu_interrupt(int irq, void *data)
>> struct jh71xx_pmu *pmu = data;
>> u32 val;
>>
>> - val = readl(pmu->base + JH71XX_PMU_INT_STATUS);
>> + regmap_read(pmu->base, JH71XX_PMU_INT_STATUS, &val);
>>
>> if (val & JH71XX_PMU_INT_SEQ_DONE)
>> dev_dbg(pmu->dev, "sequence done.\n");
>> @@ -220,8 +223,8 @@ static irqreturn_t jh71xx_pmu_interrupt(int irq, void *data)
>> dev_err(pmu->dev, "p-channel fail event.\n");
>>
>> /* clear interrupts */
>> - writel(val, pmu->base + JH71XX_PMU_INT_STATUS);
>> - writel(val, pmu->base + JH71XX_PMU_EVENT_STATUS);
>> + regmap_write(pmu->base, JH71XX_PMU_INT_STATUS, val);
>> + regmap_write(pmu->base, JH71XX_PMU_EVENT_STATUS, val);
>>
>> return IRQ_HANDLED;
>> }
>> @@ -271,7 +274,7 @@ static int jh71xx_pmu_probe(struct platform_device *pdev)
>> if (!pmu)
>> return -ENOMEM;
>>
>> - pmu->base = devm_platform_ioremap_resource(pdev, 0);
>> + pmu->base = device_node_to_regmap(np);
>> if (IS_ERR(pmu->base))
>> return PTR_ERR(pmu->base);
>>
>> --
>> 2.25.1
>>
