[PATCH v2 0/2] Add support for Thecus N2350 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thecus N2350 is a NAS based on Marvell Armada 385 SoC.

Board Specification:

	- Marvel MV88F6820 Dual Core at 1GHz
	- 1 GiB DDR4 RAM
	- 4MB Macronix mx25l3205d SPI flash
	- 512MB Hynix H27U4G8F2DTR-BC NAND flash
	- I2C
	- 2x USB 3.0
	- 1x GBE LAN port (PHY: Marvell 88E1510)
	- 2x SATA (hot swap slots)
	- 3x buttons
	- 10x LEDS
	- serial console

Changes in v2:
- Add marvell,38x.yaml. For now, add this binding to the Marvell
directory to keep it consistent with other Marvell yaml files.
At a later date and a separate patch, consolidate the Marvell
yaml files into  marvell.yaml.
- Fix various DT bindings conformance (too numerous to list)
- Vendor prefix is not necessary, so remove it.

Tony Dinh (2):
  ARM: dts: mvebu: Add device tree binding for Marvell Armada 38x
  ARM: dts: mvebu: add Thecus N2350 board DTS

 .../bindings/arm/marvell/armada-38x.yaml      |  27 ++
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/armada-385-thecus-n2350.dts | 432 ++++++++++++++++++
 3 files changed, 460 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
 create mode 100644 arch/arm/boot/dts/armada-385-thecus-n2350.dts

-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux