On 10.04.2023 18:02, Joel Selvaraj wrote:
> The touchscreen nodes were added before the driver patches were merged.
> Update the focaltech touchscreen properties to match with the upstreamed
> focaltech driver. Also, the touchscreen used is in axolotl is fts5452
> and not fts8719.
>
> Signed-off-by: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
> ---
same comments as 4/5
Konrad
> arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> index b54e304abf71..96dd4628d9a7 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> @@ -474,23 +474,22 @@ &i2c5 {
> status = "okay";
>
> touchscreen@38 {
> - compatible = "focaltech,fts8719";
> + compatible = "focaltech,fts5452";
> reg = <0x38>;
> - wakeup-source;
> +
> interrupt-parent = <&tlmm>;
> - interrupts = <125 0x2>;
> - vdd-supply = <&vreg_l28a_3p0>;
> - vcc-i2c-supply = <&vreg_l14a_1p88>;
> + interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
> +
> + avdd-supply = <&vreg_l28a_3p0>;
> + vddio-supply = <&vreg_l14a_1p88>;
>
> pinctrl-names = "default", "suspend";
> pinctrl-0 = <&ts_int_active &ts_reset_active>;
> pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
>
> - reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
> - irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
> touchscreen-size-x = <1080>;
> touchscreen-size-y = <2160>;
> - focaltech,max-touch-number = <5>;
> };
> };
>
