On 11.04.2023 16:41, Bartosz Golaszewski wrote:
> On Tue, Apr 11, 2023 at 3:16 PM Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>>
>>
>>
>> On 11.04.2023 14:59, Bartosz Golaszewski wrote:
>>> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>>>
>>> Add the Adreno GPU IOMMU for sa8775p-based platforms.
>>>
>>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>>> ---
>>> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 37 +++++++++++++++++++++++++++
>>> 1 file changed, 37 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> index 191b510b5a1a..11f3d80dd869 100644
>>> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>> @@ -7,6 +7,7 @@
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/clock/qcom,rpmh.h>
>>> #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>>> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>>> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>>> #include <dt-bindings/power/qcom-rpmpd.h>
>>> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> @@ -605,6 +606,42 @@ gpucc: clock-controller@3d90000 {
>>> #power-domain-cells = <1>;
>>> };
>>>
>>> + adreno_smmu: iommu@3da0000 {
>>> + compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
>>> + "arm,mmu-500";
>> Err.. does it even boot like this? You dropped the qcom,smmu-500 compatible
>> which means it's getting bound to the generic SMMU driver (without
>> QC quirks). If that was a mistake, you should have had all 4
>>
>> "qcom,sa8775p-smmu-500", qcom,adreno-smmu, "qcom,smmu-500", "arm,mmu-500"
>>
>> Without falling into the qc-specific codepaths, the Adreno compat does
>> nothing.
>>
>
> I did that initially, then noticed dtbs_check fails because the
> existing adreno GPUs implementing "arm,smmu-500" expect three
> compatibles like in this commit. I did that and the driver still
> probed the same so I assumed all's good. You're right of course, the
> adreno impl is not being assigned without "qcom,smmu-500". Are the
> bindings wrong in this case and should it be something like the
> following?
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> index d966dc65ce10..cd1b052a7242 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> @@ -84,6 +84,7 @@ properties:
> - qcom,sm8150-smmu-500
> - qcom,sm8250-smmu-500
> - const: qcom,adreno-smmu
> + - const: qcom,smmu-500
> - const: arm,mmu-500
> - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
> items:
>
> Bartosz
Check
https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/commit/?h=for-joerg/arm-smmu/bindings&id=5c3686616b1840b3143b227eb58fb1c1621d204e
Konrad
>
>> Konrad
>>> + reg = <0x0 0x03da0000 0x0 0x20000>;
>>> + #iommu-cells = <2>;
>>> + #global-interrupts = <2>;
>>> + dma-coherent;
>>> + power-domains = <&gpucc GPU_CC_CX_GDSC>;
>>> + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
>>> + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
>>> + <&gpucc GPU_CC_AHB_CLK>,
>>> + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
>>> + <&gpucc GPU_CC_CX_GMU_CLK>,
>>> + <&gpucc GPU_CC_HUB_CX_INT_CLK>,
>>> + <&gpucc GPU_CC_HUB_AON_CLK>;
>>> + clock-names = "gcc_gpu_memnoc_gfx_clk",
>>> + "gcc_gpu_snoc_dvm_gfx_clk",
>>> + "gpu_cc_ahb_clk",
>>> + "gpu_cc_hlos1_vote_gpu_smmu_clk",
>>> + "gpu_cc_cx_gmu_clk",
>>> + "gpu_cc_hub_cx_int_clk",
>>> + "gpu_cc_hub_aon_clk";
>>> + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
>>> + };
>>> +
>>> pdc: interrupt-controller@b220000 {
>>> compatible = "qcom,sa8775p-pdc", "qcom,pdc";
>>> reg = <0x0 0x0b220000 0x0 0x30000>,
