On Thu, 06 Apr 2023 22:41:50 +0300, Cristian Ciocaltea wrote: > This patch series introduces support for the Rockchip RK860X regulators, > while also providing a few fixes and improvements to the existing fan53555 > driver. > > RK8600/RK8601 are quite similar to the FAN53555 regulators. > > RK8602/RK8603 are a bit different, having a wider output voltage > selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They are used > in the Rock 5B board to power the ARM Cortex-A76 cores and the NPU. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next Thanks! [1/8] regulator: dt-bindings: fcs,fan53555: Add support for RK860X (no commit info) [2/8] regulator: fan53555: Explicitly include bits header commit: 4fb9a5060f73627303bc531ceaab1b19d0a24aef [3/8] regulator: fan53555: Fix wrong TCS_SLEW_MASK commit: c5d5b55b3c1a314137a251efc1001dfd435c6242 [4/8] regulator: fan53555: Remove unused *_SLEW_SHIFT definitions (no commit info) [5/8] regulator: fan53555: Make use of the bit macros (no commit info) [6/8] regulator: fan53555: Improve vsel_mask computation (no commit info) [7/8] regulator: fan53555: Use dev_err_probe (no commit info) [8/8] regulator: fan53555: Add support for RK860X (no commit info) All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
