From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Update relevant DT bindings, add new config to the driver and add UFS and PHY nodes to the .dtsi and enable them in the board .dts for sa8775p-ride. v2 -> v3: - fix DT bindings: move allOf: below required: - collect review tags v1 -> v2: - order new compatibles alphabetically - rework the UFS PHY bindings to accomodate more clocks - add a comment in the .dts regarding a non-standard clock used by the UFS PHY Bartosz Golaszewski (5): dt-bindings: ufs: qcom: add compatible for sa8775p dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p arm64: dts: qcom: sa8775p: add UFS nodes arm64: dts: qcom: sa8775p-ride: enable UFS .../phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 26 ++++++++- .../devicetree/bindings/ufs/qcom,ufs.yaml | 2 + arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 19 ++++++ arch/arm64/boot/dts/qcom/sa8775p.dtsi | 58 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 ++++++++++++ 5 files changed, 142 insertions(+), 1 deletion(-) -- 2.37.2
