On 9.04.2023 20:21, Dmitry Baryshkov wrote:
> Unlike typical GIC interrupts, first cell for SPMI interrupts is the
> USID rather than GIC_SPI/GIC_PPI/GIC_LPI qualifier. Fix the resin
> interrupt to use USID value 0x0 rather than GIC_SPI define.
>
> Fixes: f86ae6f23a9e ("arm64: dts: qcom: sagit: add initial device tree for sagit")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index adbba9f4089a..13925ac44669 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -55,7 +55,7 @@ pm8998_pwrkey: pwrkey {
>
> pm8998_resin: resin {
> compatible = "qcom,pm8941-resin";
> - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> debounce = <15625>;
> bias-pull-up;
> status = "disabled";
