Re: [PATCH 2/3] iio: pressure: Honeywell mpr pressure sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 6 Apr 2023 21:43:57 +0200
Andreas Klinger <ak@xxxxxxxxxxxxx> wrote:

> Hi Jonathan,
> 
> thanks for the extensive review. Most of it is clear but one questions remain.
> See below.
> 
> Jonathan Cameron <jic23@xxxxxxxxxx> schrieb am Sa, 01. Apr 18:57:
> > > +static void mpr_reset(struct mpr_data *data)
> > > +{
> > > +	if (data->gpiod_reset) {
> > > +		gpiod_set_value(data->gpiod_reset, 0);
> > > +		udelay(10);
> > > +		gpiod_set_value(data->gpiod_reset, 1);
> > > +	}  
> > 
> > If there isn't a reset signal, I'd like to see an attempt at least to write
> > all configuration registers to a known value (same as the one you'd
> > get after reset).    
> 
> There is no configuration register in the sensor I could write to. But maybe I
> didn't comprehend your point.

Ah. Devices is even simpler than I was anticipating. Which makes me wonder.
What does the reset actually do?

I checked the datasheet and reason to bother with this is about powersupplies
that don't come up fast enough.  Fair enough. If someone hasn't wired
the reset I guess they are happy that the power on reset will work.
(4.0 Power support requirement) 

Jonathan

> 
> Andreas
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux