All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,sdx55-pinctrl.yaml | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a40175258495..67af99dd8f14 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -48,6 +48,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
@@ -91,18 +92,9 @@ $defs:
uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
uim2_reset, usb2phy_ac, vsense_trigger ]
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- drive-strength: true
- output-high: true
- output-low: true
-
required:
- pins
- additionalProperties: false
-
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
--
2.34.1
