On 7.04.2023 20:35, Bjorn Andersson wrote:
> On Wed, Apr 05, 2023 at 05:50:32PM +0200, Konrad Dybcio wrote:
>> Add an initial device tree for the QCM2290 low-end SoC, featuring 4
>> "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X).
>>
>> This revision brings support for:
>> - TSENS & thermal zones
>> - SDHCI1/2
>> - I2C, SPI, UART
>> - MPSS
>> - ADSP
>> - Wi-Fi
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++
>> 2 files changed, 1562 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 1a29403400b7..6fc8d6664f0c 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
>
> I moved this to the patch that actually introduces rb1.dts
Thanks for spotting this!
Konrad
>
> Thanks,
> Bjorn
>
>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
>> new file mode 100644
>> index 000000000000..ae5abc76bcc7
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
>> @@ -0,0 +1,1561 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * Copyright (c) 2023, Linaro Ltd
>> + *
>> + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
>> +#include <dt-bindings/clock/qcom,rpmcc.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/firmware/qcom,scm.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + chosen { };
>> +
>> + clocks {
>> + xo_board: xo-board {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <32764>;
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0 0x0>;
>> + clocks = <&cpufreq_hw 0>;
>> + capacity-dmips-mhz = <1024>;
>> + dynamic-power-coefficient = <100>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + qcom,freq-domain = <&cpufreq_hw 0>;
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + cache-level = <2>;
>> + };
>> + };
>> +
>> + CPU1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0 0x1>;
>> + clocks = <&cpufreq_hw 0>;
>> + capacity-dmips-mhz = <1024>;
>> + dynamic-power-coefficient = <100>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + qcom,freq-domain = <&cpufreq_hw 0>;
>> + };
>> +
>> + CPU2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0 0x2>;
>> + clocks = <&cpufreq_hw 0>;
>> + capacity-dmips-mhz = <1024>;
>> + dynamic-power-coefficient = <100>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + qcom,freq-domain = <&cpufreq_hw 0>;
>> + };
>> +
>> + CPU3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53";
>> + reg = <0x0 0x3>;
>> + clocks = <&cpufreq_hw 0>;
>> + capacity-dmips-mhz = <1024>;
>> + dynamic-power-coefficient = <100>;
>> + enable-method = "psci";
>> + next-level-cache = <&L2_0>;
>> + qcom,freq-domain = <&cpufreq_hw 0>;
>> + };
>> +
>> + cpu-map {
>> + cluster0 {
>> + core0 {
>> + cpu = <&CPU0>;
>> + };
>> +
>> + core1 {
>> + cpu = <&CPU1>;
>> + };
>> +
>> + core2 {
>> + cpu = <&CPU2>;
>> + };
>> +
>> + core3 {
>> + cpu = <&CPU3>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + firmware {
>> + scm: scm {
>> + compatible = "qcom,scm-qcm2290", "qcom,scm";
>> + clocks = <&rpmcc RPM_SMD_CE1_CLK>;
>> + clock-names = "core";
>> + #reset-cells = <1>;
>> + };
>> + };
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0 0x40000000 0 0>;
>> + };
>> +
>> + pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> + };
>> +
>> + reserved_memory: reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + hyp_mem: hyp@45700000 {
>> + reg = <0x0 0x45700000 0x0 0x600000>;
>> + no-map;
>> + };
>> +
>> + xbl_aop_mem: xbl-aop@45e00000 {
>> + reg = <0x0 0x45e00000 0x0 0x140000>;
>> + no-map;
>> + };
>> +
>> + sec_apps_mem: sec-apps@45fff000 {
>> + reg = <0x0 0x45fff000 0x0 0x1000>;
>> + no-map;
>> + };
>> +
>> + smem_mem: smem@46000000 {
>> + compatible = "qcom,smem";
>> + reg = <0x0 0x46000000 0x0 0x200000>;
>> + no-map;
>> +
>> + hwlocks = <&tcsr_mutex 3>;
>> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> + };
>> +
>> + pil_modem_mem: modem@4ab00000 {
>> + reg = <0x0 0x4ab00000 0x0 0x6900000>;
>> + no-map;
>> + };
>> +
>> + pil_video_mem: video@51400000 {
>> + reg = <0x0 0x51400000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + wlan_msa_mem: wlan-msa@51900000 {
>> + reg = <0x0 0x51900000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + pil_adsp_mem: adsp@51a00000 {
>> + reg = <0x0 0x51a00000 0x0 0x1c00000>;
>> + no-map;
>> + };
>> +
>> + pil_ipa_fw_mem: ipa-fw@53600000 {
>> + reg = <0x0 0x53600000 0x0 0x10000>;
>> + no-map;
>> + };
>> +
>> + pil_ipa_gsi_mem: ipa-gsi@53610000 {
>> + reg = <0x0 0x53610000 0x0 0x5000>;
>> + no-map;
>> + };
>> +
>> + pil_gpu_mem: zap@53615000 {
>> + compatible = "shared-dma-pool";
>> + reg = <0x0 0x53615000 0x0 0x2000>;
>> + no-map;
>> + };
>> +
>> + cont_splash_memory: framebuffer@5c000000 {
>> + reg = <0x0 0x5c000000 0x0 0x00f00000>;
>> + no-map;
>> + };
>> +
>> + dfps_data_memory: dpfs-data@5cf00000 {
>> + reg = <0x0 0x5cf00000 0x0 0x0100000>;
>> + no-map;
>> + };
>> +
>> + removed_mem: reserved@60000000 {
>> + reg = <0x0 0x60000000 0x0 0x3900000>;
>> + no-map;
>> + };
>> +
>> + rmtfs_mem: memory@89b01000 {
>> + compatible = "qcom,rmtfs-mem";
>> + reg = <0x0 0x89b01000 0x0 0x200000>;
>> + no-map;
>> +
>> + qcom,client-id = <1>;
>> + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
>> + };
>> + };
>> +
>> + rpm-glink {
>> + compatible = "qcom,glink-rpm";
>> + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
>> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> + mboxes = <&apcs_glb 0>;
>> +
>> + rpm_requests: rpm-requests {
>> + compatible = "qcom,rpm-qcm2290";
>> + qcom,glink-channels = "rpm_requests";
>> +
>> + rpmcc: clock-controller {
>> + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
>> + clocks = <&xo_board>;
>> + clock-names = "xo";
>> + #clock-cells = <1>;
>> + };
>> +
>> + rpmpd: power-controller {
>> + compatible = "qcom,qcm2290-rpmpd";
>> + #power-domain-cells = <1>;
>> + operating-points-v2 = <&rpmpd_opp_table>;
>> +
>> + rpmpd_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + rpmpd_opp_min_svs: opp1 {
>> + opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
>> + };
>> +
>> + rpmpd_opp_low_svs: opp2 {
>> + opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
>> + };
>> +
>> + rpmpd_opp_svs: opp3 {
>> + opp-level = <RPM_SMD_LEVEL_SVS>;
>> + };
>> +
>> + rpmpd_opp_svs_plus: opp4 {
>> + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
>> + };
>> +
>> + rpmpd_opp_nom: opp5 {
>> + opp-level = <RPM_SMD_LEVEL_NOM>;
>> + };
>> +
>> + rpmpd_opp_nom_plus: opp6 {
>> + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
>> + };
>> +
>> + rpmpd_opp_turbo: opp7 {
>> + opp-level = <RPM_SMD_LEVEL_TURBO>;
>> + };
>> +
>> + rpmpd_opp_turbo_plus: opp8 {
>> + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +
>> + smp2p-adsp {
>> + compatible = "qcom,smp2p";
>> + qcom,smem = <443>, <429>;
>> +
>> + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
>> +
>> + mboxes = <&apcs_glb 10>;
>> +
>> + qcom,local-pid = <0>;
>> + qcom,remote-pid = <2>;
>> +
>> + adsp_smp2p_out: master-kernel {
>> + qcom,entry-name = "master-kernel";
>> + #qcom,smem-state-cells = <1>;
>> + };
>> +
>> + adsp_smp2p_in: slave-kernel {
>> + qcom,entry-name = "slave-kernel";
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +
>> + smp2p-mpss {
>> + compatible = "qcom,smp2p";
>> + qcom,smem = <435>, <428>;
>> +
>> + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
>> +
>> + mboxes = <&apcs_glb 14>;
>> +
>> + qcom,local-pid = <0>;
>> + qcom,remote-pid = <1>;
>> +
>> + modem_smp2p_out: master-kernel {
>> + qcom,entry-name = "master-kernel";
>> + #qcom,smem-state-cells = <1>;
>> + };
>> +
>> + modem_smp2p_in: slave-kernel {
>> + qcom,entry-name = "slave-kernel";
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + wlan_smp2p_in: wlan-wpss-to-ap {
>> + qcom,entry-name = "wlan";
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> + };
>> +
>> + soc: soc@0 {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges = <0 0 0 0 0x10 0>;
>> + dma-ranges = <0 0 0 0 0x10 0>;
>> +
>> + tcsr_mutex: hwlock@340000 {
>> + compatible = "qcom,tcsr-mutex";
>> + reg = <0x0 0x00340000 0x0 0x20000>;
>> + #hwlock-cells = <1>;
>> + };
>> +
>> + tlmm: pinctrl@500000 {
>> + compatible = "qcom,qcm2290-tlmm";
>> + reg = <0x0 0x00500000 0x0 0x300000>;
>> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + gpio-ranges = <&tlmm 0 0 127>;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + qup_i2c0_default: qup-i2c0-default-state {
>> + pins = "gpio0", "gpio1";
>> + function = "qup0";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_i2c1_default: qup-i2c1-default-state {
>> + pins = "gpio4", "gpio5";
>> + function = "qup1";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_i2c2_default: qup-i2c2-default-state {
>> + pins = "gpio6", "gpio7";
>> + function = "qup2";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_i2c3_default: qup-i2c3-default-state {
>> + pins = "gpio8", "gpio9";
>> + function = "qup3";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_i2c4_default: qup-i2c4-default-state {
>> + pins = "gpio12", "gpio13";
>> + function = "qup4";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_i2c5_default: qup-i2c5-default-state {
>> + pins = "gpio14", "gpio15";
>> + function = "qup5";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_spi0_default: qup-spi0-default-state {
>> + pins = "gpio0", "gpio1","gpio2", "gpio3";
>> + function = "qup0";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_spi1_default: qup-spi1-default-state {
>> + pins = "gpio4", "gpio5", "gpio69", "gpio70";
>> + function = "qup1";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_spi2_default: qup-spi2-default-state {
>> + pins = "gpio6", "gpio7", "gpio71", "gpio80";
>> + function = "qup2";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_spi3_default: qup-spi3-default-state {
>> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> + function = "qup3";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_spi4_default: qup-spi4-default-state {
>> + pins = "gpio12", "gpio13", "gpio96", "gpio97";
>> + function = "qup4";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_spi5_default: qup-spi5-default-state {
>> + pins = "gpio14", "gpio15", "gpio16", "gpio17";
>> + function = "qup5";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + qup_uart0_default: qup-uart0-default-state {
>> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
>> + function = "qup0";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + qup_uart4_default: qup-uart4-default-state {
>> + pins = "gpio12", "gpio13";
>> + function = "qup4";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + sdc1_state_on: sdc1-on-state {
>> + clk-pins {
>> + pins = "sdc1_clk";
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "sdc1_cmd";
>> + drive-strength = <10>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "sdc1_data";
>> + drive-strength = <10>;
>> + bias-pull-up;
>> + };
>> +
>> + rclk-pins {
>> + pins = "sdc1_rclk";
>> + bias-pull-down;
>> + };
>> + };
>> +
>> + sdc1_state_off: sdc1-off-state {
>> + clk-pins {
>> + pins = "sdc1_clk";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "sdc1_cmd";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "sdc1_data";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + rclk-pins {
>> + pins = "sdc1_rclk";
>> + bias-pull-down;
>> + };
>> + };
>> +
>> + sdc2_state_on: sdc2-on-state {
>> + clk-pins {
>> + pins = "sdc2_clk";
>> + drive-strength = <16>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "sdc2_cmd";
>> + drive-strength = <10>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "sdc2_data";
>> + drive-strength = <10>;
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + sdc2_state_off: sdc2-off-state {
>> + clk-pins {
>> + pins = "sdc2_clk";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + cmd-pins {
>> + pins = "sdc2_cmd";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + data-pins {
>> + pins = "sdc2_data";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> + };
>> + };
>> +
>> + gcc: clock-controller@1400000 {
>> + compatible = "qcom,gcc-qcm2290";
>> + reg = <0x0 0x01400000 0x0 0x1f0000>;
>> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
>> + clock-names = "bi_tcxo", "sleep_clk";
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + usb_hsphy: phy@1613000 {
>> + compatible = "qcom,qcm2290-qusb2-phy";
>> + reg = <0x0 0x01613000 0x0 0x180>;
>> +
>> + clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
>> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> + clock-names = "cfg_ahb", "ref";
>> +
>> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>> + nvmem-cells = <&qusb2_hstx_trim>;
>> + #phy-cells = <0>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + qfprom@1b44000 {
>> + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
>> + reg = <0x0 0x01b44000 0x0 0x3000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + qusb2_hstx_trim: hstx-trim@25b {
>> + reg = <0x25b 0x1>;
>> + bits = <1 4>;
>> + };
>> + };
>> +
>> + spmi_bus: spmi@1c40000 {
>> + compatible = "qcom,spmi-pmic-arb";
>> + reg = <0x0 0x01c40000 0x0 0x1100>,
>> + <0x0 0x01e00000 0x0 0x2000000>,
>> + <0x0 0x03e00000 0x0 0x100000>,
>> + <0x0 0x03f00000 0x0 0xa0000>,
>> + <0x0 0x01c0a000 0x0 0x26000>;
>> + reg-names = "core",
>> + "chnls",
>> + "obsrvr",
>> + "intr",
>> + "cnfg";
>> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "periph_irq";
>> + qcom,ee = <0>;
>> + qcom,channel = <0>;
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> + interrupt-controller;
>> + #interrupt-cells = <4>;
>> + };
>> +
>> + tsens0: thermal-sensor@4411000 {
>> + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
>> + reg = <0x0 0x04411000 0x0 0x1ff>,
>> + <0x0 0x04410000 0x0 0x8>;
>> + #qcom,sensors = <10>;
>> + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "uplow", "critical";
>> + #thermal-sensor-cells = <1>;
>> + };
>> +
>> + rng: rng@4453000 {
>> + compatible = "qcom,prng-ee";
>> + reg = <0x0 0x04453000 0x0 0x1000>;
>> + clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
>> + clock-names = "core";
>> + };
>> +
>> + rpm_msg_ram: sram@45f0000 {
>> + compatible = "qcom,rpm-msg-ram";
>> + reg = <0x0 0x045f0000 0x0 0x7000>;
>> + };
>> +
>> + sram@4690000 {
>> + compatible = "qcom,rpm-stats";
>> + reg = <0x0 0x04690000 0x0 0x10000>;
>> + };
>> +
>> + sdhc_1: mmc@4744000 {
>> + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x0 0x04744000 0x0 0x1000>,
>> + <0x0 0x04745000 0x0 0x1000>,
>> + <0x0 0x04748000 0x0 0x8000>;
>> + reg-names = "hc",
>> + "cqhci",
>> + "ice";
>> +
>> + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&rpmcc RPM_SMD_XO_CLK_SRC>,
>> + <&gcc GCC_SDCC1_ICE_CORE_CLK>;
>> + clock-names = "iface",
>> + "core",
>> + "xo",
>> + "ice";
>> +
>> + resets = <&gcc GCC_SDCC1_BCR>;
>> +
>> + power-domains = <&rpmpd QCM2290_VDDCX>;
>> + iommus = <&apps_smmu 0xc0 0x0>;
>> +
>> + qcom,dll-config = <0x000f642c>;
>> + qcom,ddr-config = <0x80040868>;
>> + bus-width = <8>;
>> +
>> + status = "disabled";
>> + };
>> +
>> + sdhc_2: mmc@4784000 {
>> + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0x0 0x04784000 0x0 0x1000>;
>> + reg-names = "hc";
>> +
>> + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
>> + <&gcc GCC_SDCC2_APPS_CLK>,
>> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> + clock-names = "iface",
>> + "core",
>> + "xo";
>> +
>> + resets = <&gcc GCC_SDCC2_BCR>;
>> +
>> + power-domains = <&rpmpd QCM2290_VDDCX>;
>> + operating-points-v2 = <&sdhc2_opp_table>;
>> + iommus = <&apps_smmu 0xa0 0x0>;
>> +
>> + qcom,dll-config = <0x0007642c>;
>> + qcom,ddr-config = <0x80040868>;
>> + bus-width = <4>;
>> +
>> + status = "disabled";
>> +
>> + sdhc2_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-100000000 {
>> + opp-hz = /bits/ 64 <100000000>;
>> + required-opps = <&rpmpd_opp_low_svs>;
>> + };
>> +
>> + opp-202000000 {
>> + opp-hz = /bits/ 64 <202000000>;
>> + required-opps = <&rpmpd_opp_svs_plus>;
>> + };
>> + };
>> + };
>> +
>> + gpi_dma0: dma-controller@4a00000 {
>> + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
>> + reg = <0x0 0x04a00000 0x0 0x60000>;
>> + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
>> + dma-channels = <10>;
>> + dma-channel-mask = <0x1f>;
>> + iommus = <&apps_smmu 0xf6 0x0>;
>> + #dma-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + qupv3_id_0: geniqup@4ac0000 {
>> + compatible = "qcom,geni-se-qup";
>> + reg = <0x0 0x04ac0000 0x0 0x2000>;
>> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> + clock-names = "m-ahb", "s-ahb";
>> + iommus = <&apps_smmu 0xe3 0x0>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + status = "disabled";
>> +
>> + i2c0: i2c@4a80000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x04a80000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_i2c0_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi0: spi@4a80000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x04a80000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_spi0_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
>> + <&gpi_dma0 1 0 QCOM_GPI_SPI>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + uart0: serial@4a80000 {
>> + compatible = "qcom,geni-uart";
>> + reg = <0x0 0x04a80000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_uart0_default>;
>> + pinctrl-names = "default";
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@4a84000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x04a84000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_i2c1_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi1: spi@4a84000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x04a84000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_spi1_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
>> + <&gpi_dma0 1 1 QCOM_GPI_SPI>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@4a88000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x04a88000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_i2c2_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi2: spi@4a88000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x04a88000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_spi2_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
>> + <&gpi_dma0 1 2 QCOM_GPI_SPI>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c@4a8c000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x04a8c000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_i2c3_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi3: spi@4a8c000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x04a8c000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_spi3_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
>> + <&gpi_dma0 1 3 QCOM_GPI_SPI>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c@4a90000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x04a90000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_i2c4_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi4: spi@4a90000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x04a90000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi4_default>;
>> + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
>> + <&gpi_dma0 1 4 QCOM_GPI_SPI>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + uart4: serial@4a90000 {
>> + compatible = "qcom,geni-uart";
>> + reg = <0x0 0x04a90000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_uart4_default>;
>> + pinctrl-names = "default";
>> + status = "disabled";
>> + };
>> +
>> + i2c5: i2c@4a94000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x04a94000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_i2c5_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 5 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi5: spi@4a94000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x04a94000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> + clock-names = "se";
>> + pinctrl-0 = <&qup_spi5_default>;
>> + pinctrl-names = "default";
>> + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
>> + <&gpi_dma0 1 5 QCOM_GPI_SPI>;
>> + dma-names = "tx", "rx";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + usb: usb@4ef8800 {
>> + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
>> + reg = <0x0 0x04ef8800 0x0 0x400>;
>> + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hs_phy_irq", "ss_phy_irq";
>> +
>> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
>> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
>> + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
>> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
>> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> + <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
>> + clock-names = "cfg_noc",
>> + "core",
>> + "iface",
>> + "sleep",
>> + "mock_utmi",
>> + "xo";
>> +
>> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>> + assigned-clock-rates = <19200000>, <133333333>;
>> +
>> + resets = <&gcc GCC_USB30_PRIM_BCR>;
>> + power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
>> + wakeup-source;
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + status = "disabled";
>> +
>> + usb_dwc3: usb@4e00000 {
>> + compatible = "snps,dwc3";
>> + reg = <0x0 0x04e00000 0x0 0xcd00>;
>> + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> + phys = <&usb_hsphy>;
>> + phy-names = "usb2-phy";
>> + iommus = <&apps_smmu 0x120 0x0>;
>> + snps,dis_u2_susphy_quirk;
>> + snps,dis_enblslpm_quirk;
>> + snps,has-lpm-erratum;
>> + snps,hird-threshold = /bits/ 8 <0x10>;
>> + snps,usb3_lpm_capable;
>> + maximum-speed = "super-speed";
>> + dr_mode = "otg";
>> + };
>> + };
>> +
>> + remoteproc_mpss: remoteproc@6080000 {
>> + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
>> + reg = <0x0 0x06080000 0x0 0x100>;
>> +
>> + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
>> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
>> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
>> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
>> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "wdog",
>> + "fatal",
>> + "ready",
>> + "handover",
>> + "stop-ack",
>> + "shutdown-ack";
>> +
>> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> + clock-names = "xo";
>> +
>> + power-domains = <&rpmpd QCM2290_VDDCX>;
>> +
>> + memory-region = <&pil_modem_mem>;
>> +
>> + qcom,smem-states = <&modem_smp2p_out 0>;
>> + qcom,smem-state-names = "stop";
>> +
>> + status = "disabled";
>> +
>> + glink-edge {
>> + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
>> + label = "mpss";
>> + qcom,remote-pid = <1>;
>> + mboxes = <&apcs_glb 12>;
>> + };
>> + };
>> +
>> + remoteproc_adsp: remoteproc@ab00000 {
>> + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
>> + reg = <0x0 0x0ab00000 0x0 0x100>;
>> +
>> + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
>> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
>> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
>> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "wdog",
>> + "fatal",
>> + "ready",
>> + "handover",
>> + "stop-ack";
>> +
>> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> + clock-names = "xo";
>> +
>> + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
>> + <&rpmpd QCM2290_VDD_LPI_MX>;
>> +
>> + memory-region = <&pil_adsp_mem>;
>> +
>> + qcom,smem-states = <&adsp_smp2p_out 0>;
>> + qcom,smem-state-names = "stop";
>> +
>> + status = "disabled";
>> +
>> + glink-edge {
>> + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
>> + label = "lpass";
>> + qcom,remote-pid = <2>;
>> + mboxes = <&apcs_glb 8>;
>> + };
>> + };
>> +
>> + apps_smmu: iommu@c600000 {
>> + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>> + reg = <0x0 0x0c600000 0x0 0x80000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <1>;
>> +
>> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + wifi: wifi@c800000 {
>> + compatible = "qcom,wcn3990-wifi";
>> + reg = <0x0 0x0c800000 0x0 0x800000>;
>> + reg-names = "membase";
>> + memory-region = <&wlan_msa_mem>;
>> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
>> + iommus = <&apps_smmu 0x1a0 0x1>;
>> + qcom,msa-fixed-perm;
>> + status = "disabled";
>> + };
>> +
>> + watchdog@f017000 {
>> + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
>> + reg = <0x0 0x0f017000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
>> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&sleep_clk>;
>> + };
>> +
>> + apcs_glb: mailbox@f111000 {
>> + compatible = "qcom,qcm2290-apcs-hmss-global";
>> + reg = <0x0 0x0f111000 0x0 0x1000>;
>> + #mbox-cells = <1>;
>> + };
>> +
>> + timer@f120000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0 0x0f120000 0x0 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0 0x0 0x0f121000 0x8000>;
>> +
>> + frame@0 {
>> + reg = <0x0 0x1000>,
>> + <0x1000 0x1000>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <0>;
>> + };
>> +
>> + frame@2000 {
>> + reg = <0x2000 0x1000>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <1>;
>> + status = "disabled";
>> + };
>> +
>> + frame@3000 {
>> + reg = <0x3000 0x1000>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <2>;
>> + status = "disabled";
>> + };
>> +
>> + frame@4000 {
>> + reg = <0x4000 0x1000>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <3>;
>> + status = "disabled";
>> + };
>> +
>> + frame@5000 {
>> + reg = <0x5000 0x1000>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <4>;
>> + status = "disabled";
>> + };
>> +
>> + frame@6000 {
>> + reg = <0x6000 0x1000>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <5>;
>> + status = "disabled";
>> + };
>> +
>> + frame@7000 {
>> + reg = <0x7000 0x1000>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + frame-number = <6>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + intc: interrupt-controller@f200000 {
>> + compatible = "arm,gic-v3";
>> + reg = <0x0 0x0f200000 0x0 0x10000>,
>> + <0x0 0x0f300000 0x0 0x100000>;
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + interrupt-parent = <&intc>;
>> + #redistributor-regions = <1>;
>> + redistributor-stride = <0x0 0x20000>;
>> + };
>> +
>> + cpufreq_hw: cpufreq@f521000 {
>> + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
>> + reg = <0x0 0x0f521000 0x0 0x1000>;
>> + reg-names = "freq-domain0";
>> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "dcvsh-irq-0";
>> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
>> + clock-names = "xo", "alternate";
>> +
>> + #freq-domain-cells = <1>;
>> + #clock-cells = <1>;
>> + };
>> + };
>> +
>> + thermal-zones {
>> + mapss-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 0>;
>> +
>> + trips {
>> + mapss_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + mapss_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + mapss_crit: mapss-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + video-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 1>;
>> +
>> + trips {
>> + video_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + video_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + video_crit: video-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + wlan-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 2>;
>> +
>> + trips {
>> + wlan_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + wlan_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + wlan_crit: wlan-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + cpuss0-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 3>;
>> +
>> + trips {
>> + cpuss0_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + cpuss0_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + cpuss0_crit: cpuss0-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + cpuss1-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 4>;
>> +
>> + trips {
>> + cpuss1_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + cpuss1_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + cpuss1_crit: cpuss1-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + mdm0-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 5>;
>> +
>> + trips {
>> + mdm0_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + mdm0_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + mdm0_crit: mdm0-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + mdm1-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 6>;
>> +
>> + trips {
>> + mdm1_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + mdm1_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + mdm1_crit: mdm1-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + gpu-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 7>;
>> +
>> + trips {
>> + gpu_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + gpu_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + gpu_crit: gpu-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + hm-center-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 8>;
>> +
>> + trips {
>> + hm_center_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + hm_center_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + hm_center_crit: hm-center-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + camera-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> +
>> + thermal-sensors = <&tsens0 9>;
>> +
>> + trips {
>> + camera_alert0: trip-point0 {
>> + temperature = <90000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + camera_alert1: trip-point1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + camera_crit: camera-crit {
>> + temperature = <110000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +};
>>
>> --
>> 2.40.0
>>
