Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 1 -
arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 -
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 2 --
arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts | 3 ---
4 files changed, 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 8b71b1f8f300..b35e2d9f428c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -640,7 +640,6 @@ hall_sensor1_default: hall-sensor1-def-state {
function = "gpio";
bias-disable;
drive-strength = <2>;
- input-enable;
};
ts_int_n: ts-int-n-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index ce03c7c239e5..062d56c42385 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -501,7 +501,6 @@ hall_sensor_default: hall-sensor-default-state {
function = "gpio";
drive-strength = <2>;
bias-disable;
- input-enable;
};
ts_int_active: ts-int-active-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 8e1c25b15f57..687e96068cb2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -844,7 +844,6 @@ tof_int_n: tof-int-n-state {
function = "gpio";
bias-pull-up;
drive-strength = <2>;
- input-enable;
};
chat_cam_pwr_en: chat-cam-pwr-en-default-state {
@@ -873,7 +872,6 @@ acc_cover_open: acc-cover-open-state {
function = "gpio";
bias-disable;
drive-strength = <2>;
- input-enable;
};
ts_int_n: ts-int-n-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
index 7956b151c7a4..2444b87fddf7 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -528,7 +528,6 @@ hall_sensor_default_state: hall-sensor-default-state {
function = "gpio";
drive-strength = <2>;
bias-disable;
- input-enable;
};
mdss_dsi_active_state: mdss-dsi-active-state {
@@ -620,7 +619,6 @@ ts_active_state: ts-active-state {
function = "gpio";
drive-strength = <16>;
bias-pull-up;
- input-enable;
};
ts_int_suspend_state: ts-int-suspend-state {
@@ -642,7 +640,6 @@ wcd_int_n_state: wcd-int-n-state {
function = "gpio";
bias-pull-down;
drive-strength = <2>;
- input-enable;
};
wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
--
2.34.1
