Add nodes for remoteproc, smp2p and smsm in preparation for audio support on this platform. Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8953.dtsi | 141 ++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 257b1946372c..855595cbb09b 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -6,6 +6,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/thermal/thermal.h> / { @@ -326,6 +329,30 @@ rpmpd_opp_turbo: opp9 { }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-modem { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -1532,6 +1559,120 @@ frame@b128000 { status = "disabled"; }; }; + + lpass: remoteproc@c200000 { + compatible = "qcom,msm8953-adsp-pil"; + reg = <0x0c200000 0x100>; + + interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; }; thermal-zones { -- 2.25.1