This patch series adds support for the X-Powers AXP15060 PMIC, which is a general purpose PMIC seen on different boards with different SOC. This series were tested on Starfive Visionfive 2 board. On this board, IRQ line from PMIC isn't connected so PEK function is completely unable to use, so IRQ existence detection is added to patch 2 to avoid initialization failure. Besides, its GPIO/LDO control logic is quite different from other chips and is not easy to add support for it basing on existing axp20x GPIO driver, so I didn't add support for it in this series. Maybe others could do this. Shengyu Qu (4): dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant mfd: axp20x: Add support for AXP15060 PMIC regulator: axp20x: Add AXP15060 support regulator: axp20x: Set DCDC frequency only when property exists .../bindings/mfd/x-powers,axp152.yaml | 3 +- drivers/mfd/axp20x-i2c.c | 2 + drivers/mfd/axp20x.c | 90 +++++++ drivers/regulator/axp20x-regulator.c | 237 +++++++++++++++++- include/linux/mfd/axp20x.h | 85 +++++++ 5 files changed, 404 insertions(+), 13 deletions(-) -- 2.25.1
