Add USB superspeed qmp phy node to dtsi.
Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
.../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++--
.../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++
3 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index a1f0622db5a0..75951fd439df 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -242,6 +242,9 @@ &usb {
&usb_dwc3 {
maximum-speed = "high-speed";
dr_mode = "peripheral";
+
+ phys = <&usb_hsphy>;
+ phy-names = "usb2-phy";
};
&usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 2505c815c65a..f42065a0a71d 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -651,6 +651,38 @@ usb_hsphy: phy@1613000 {
status = "disabled";
};
+ usb_qmpphy: phy@1615000 {
+ compatible = "qcom,sm6115-qmp-usb3-phy";
+ reg = <0x0 0x01615000 0x0 0x200>;
+ clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "cfg_ahb",
+ "ref",
+ "com_aux";
+ resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+ reset-names = "phy", "phy_phy";
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usb_ssphy: phy@1615200 {
+ reg = <0x0 0x01615200 0x0 0x200>,
+ <0x0 0x01615400 0x0 0x200>,
+ <0x0 0x01615c00 0x0 0x400>,
+ <0x0 0x01615600 0x0 0x200>,
+ <0x0 0x01615800 0x0 0x200>,
+ <0x0 0x01615a00 0x0 0x100>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -1101,8 +1133,8 @@ usb_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
reg = <0x0 0x04e00000 0x0 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb_hsphy>;
- phy-names = "usb2-phy";
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
iommus = <&apps_smmu 0x120 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 10c9d338446c..d60cc024749b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -280,6 +280,9 @@ &usb {
&usb_dwc3 {
maximum-speed = "high-speed";
dr_mode = "peripheral";
+
+ phys = <&usb_hsphy>;
+ phy-names = "usb2-phy";
};
&usb_hsphy {
--
2.38.1
