From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Add QMP PHY config for sa8775p and add support for the new compatible.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 +++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index d58822049211..5612282eb378 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -853,6 +853,41 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
+
+static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_ufs_offsets,
+
+ .tbls = {
+ .serdes = sm8350_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes),
+ .tx = sm8350_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx),
+ .rx = sm8350_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx),
+ .pcs = sm8350_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs),
+ },
+ .tbls_hs_b = {
+ .serdes = sm8350_ufsphy_hs_b_serdes,
+ .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
+ },
+ .tbls_hs_g4 = {
+ .tx = sm8350_ufsphy_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+ .rx = sm8350_ufsphy_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+ .pcs = sm8350_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+ },
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = ufsphy_v5_regs_layout,
+};
+
static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
.lanes = 2,
@@ -1600,6 +1635,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qmp-ufs-phy",
.data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sa8775p-qmp-ufs-phy",
+ .data = &sa8775p_ufsphy_cfg,
}, {
.compatible = "qcom,sc8180x-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
--
2.37.2
