For consistency and improved clarity, use BIT() and GENMASK() macros for
defining the bitfields inside the registers. No functional changes
intended.
While here, also fix DIE_{ID,REV} inconsistent indentation.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
---
drivers/regulator/fan53555.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 68ebcd4ccef7..181e5eb00e7a 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -41,23 +41,23 @@
#define FAN53555_MONITOR 0x05
/* VSEL bit definitions */
-#define VSEL_BUCK_EN (1 << 7)
-#define VSEL_MODE (1 << 6)
+#define VSEL_BUCK_EN BIT(7)
+#define VSEL_MODE BIT(6)
/* Chip ID and Verison */
-#define DIE_ID 0x0F /* ID1 */
-#define DIE_REV 0x0F /* ID2 */
+#define DIE_ID 0x0F /* ID1 */
+#define DIE_REV 0x0F /* ID2 */
/* Control bit definitions */
-#define CTL_OUTPUT_DISCHG (1 << 7)
-#define CTL_SLEW_MASK (0x7 << 4)
-#define CTL_RESET (1 << 2)
+#define CTL_OUTPUT_DISCHG BIT(7)
+#define CTL_SLEW_MASK GENMASK(6, 4)
+#define CTL_RESET BIT(2)
#define CTL_MODE_VSEL0_MODE BIT(0)
#define CTL_MODE_VSEL1_MODE BIT(1)
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
#define FAN53526_NVOLTAGES 128
-#define TCS_VSEL0_MODE (1 << 7)
-#define TCS_VSEL1_MODE (1 << 6)
+#define TCS_VSEL0_MODE BIT(7)
+#define TCS_VSEL1_MODE BIT(6)
#define TCS_SLEW_MASK GENMASK(4, 3)
--
2.40.0
