Re: [PATCH 4/5] remoteproc: stm32: Allow hold boot management by the SCMI reset controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On 4/6/23 07:16, Peng Fan wrote:
Subject: Re: [PATCH 4/5] remoteproc: stm32: Allow hold boot management
by the SCMI reset controller



On 4/4/23 06:55, Peng Fan wrote:
Subject: [PATCH 4/5] remoteproc: stm32: Allow hold boot management
by
the SCMI reset controller

The hold boot can be managed by the SCMI controller as a reset.
If the "hold_boot" reset is defined in the device tree, use it.
Else use the syscon controller directly to access to the register.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
---
  drivers/remoteproc/stm32_rproc.c | 34
++++++++++++++++++++++++++-----
-
  1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/remoteproc/stm32_rproc.c
b/drivers/remoteproc/stm32_rproc.c
index 4be651e734ee..6b0d8f30a5c7 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -78,6 +78,7 @@ struct stm32_mbox {

  struct stm32_rproc {
  	struct reset_control *rst;
+	struct reset_control *hold_boot_rst;
  	struct stm32_syscon hold_boot;
  	struct stm32_syscon pdds;
  	struct stm32_syscon m4_state;
@@ -398,6 +399,14 @@ static int stm32_rproc_set_hold_boot(struct
rproc *rproc, bool hold)
  	struct stm32_syscon hold_boot = ddata->hold_boot;
  	int val, err;

+	if (ddata->hold_boot_rst) {
+		/* Use the SCMI reset controller */
+		if (!hold)
+			return reset_control_deassert(ddata-
hold_boot_rst);
+		else
+			return reset_control_assert(ddata->hold_boot_rst);
+	}
+
  	val = hold ? HOLD_BOOT : RELEASE_BOOT;

  	err = regmap_update_bits(hold_boot.map, hold_boot.reg, @@ -
693,16 +702,29 @@ static int stm32_rproc_parse_dt(struct
platform_device *pdev,
  		dev_info(dev, "wdg irq registered\n");
  	}

-	ddata->rst = devm_reset_control_get_by_index(dev, 0);
+	ddata->rst = devm_reset_control_get(dev, "mcu_rst");
[Peng Fan]
This may break legacy device tree.

That partially true by the fact that I impose the "reset-names" property (but
also suppress the "st,syscfg-tz" property)

But this should not be the case as the arch/arm/boot/dts/stm32mp151.dtsi
is updated in patch 2/5. The DTS files associated to this chip include it.

DT  maintainers may comment, from my understanding is updating driver
should not break legacy dts, saying 5.15, 5.10 dts.

An old DT should continue to work with a new kernel.

Alex


Regards,
Peng.


Thanks,
Arnaud



Regards,
Peng.

  	if (IS_ERR(ddata->rst))
  		return dev_err_probe(dev, PTR_ERR(ddata->rst),
  				     "failed to get mcu_reset\n");

-	err = stm32_rproc_get_syscon(np, "st,syscfg-holdboot",
-				     &ddata->hold_boot);
-	if (err) {
-		dev_err(dev, "failed to get hold boot\n");
-		return err;
+	ddata->hold_boot_rst = devm_reset_control_get(dev, "hold_boot");
+	if (IS_ERR(ddata->hold_boot_rst)) {
+		if (PTR_ERR(ddata->hold_boot_rst) == -EPROBE_DEFER)
+			return PTR_ERR(ddata->hold_boot_rst);
+		ddata->hold_boot_rst = NULL;
+	}
+
+	if (!ddata->hold_boot_rst) {
+		/*
+		 * If the hold boot is not managed by the SCMI reset
controller,
+		 * manage it through the syscon controller
+		 */
+		err = stm32_rproc_get_syscon(np, "st,syscfg-holdboot",
+					     &ddata->hold_boot);
+		if (err) {
+			dev_err(dev, "failed to get hold boot\n");
+			return err;
+		}
  	}

  	err = stm32_rproc_get_syscon(np, "st,syscfg-pdds", &ddata->pdds);
--
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux