Add cpu freq nodes in the device tree to bump cpu frequency above 800MHz.
Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---
Changes in V3:
- No change
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 58 +++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 1f9b7529e7ed..cfef87b5fd22 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -6,6 +6,7 @@
* Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
@@ -37,6 +38,10 @@
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq9574_s1>;
};
CPU1: cpu@1 {
@@ -45,6 +50,10 @@
reg = <0x1>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq9574_s1>;
};
CPU2: cpu@2 {
@@ -53,6 +62,10 @@
reg = <0x2>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq9574_s1>;
};
CPU3: cpu@3 {
@@ -61,6 +74,10 @@
reg = <0x3>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+ clock-names = "cpu";
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-supply = <&ipq9574_s1>;
};
L2_0: l2-cache {
@@ -75,6 +92,47 @@
reg = <0x0 0x40000000 0x0 0x0>;
};
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-936000000 {
+ opp-hz = /bits/ 64 <936000000>;
+ opp-microvolt = <725000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <787500>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <862500>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1488000000 {
+ opp-hz = /bits/ 64 <1488000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <987500>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq9574", "qcom,scm";
--
2.17.1
