Enable first port of Quad port Tertiary USB controller for SA8540 Ride. Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx> --- Link to v5: https://lore.kernel.org/all/20230310163420.7582-9-quic_kriskura@xxxxxxxxxxx/ arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 24fa449d48a6..53d47593306e 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -309,6 +309,19 @@ &usb_2_qmpphy0 { status = "okay"; }; +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + phy-names = "usb2-port0", "usb3-port0"; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; +}; + &xo_board_clk { clock-frequency = <38400000>; }; @@ -401,4 +414,13 @@ wake-pins { bias-pull-up; }; }; + + usb2_en_state: usb2-en-state { + /* TS3USB221A USB2.0 mux select */ + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; }; -- 2.40.0
