Enable tertiary controller for SA8295P (based on SC8280XP). Add pinctrl support for usb ports to provide VBUS to connected peripherals. Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx> --- Link to v5: https://lore.kernel.org/all/20230310163420.7582-8-quic_kriskura@xxxxxxxxxxx/ arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index fd253942e5e5..7e6061c43835 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -584,6 +584,19 @@ &usb_1_qmpphy { status = "okay"; }; +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>, + <&usb3_en_state>, + <&usb4_en_state>, + <&usb5_en_state>; + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + &usb_2_hsphy0 { vdda-pll-supply = <&vreg_l5a>; vdda18-supply = <&vreg_l7g>; @@ -729,3 +742,37 @@ wake-n-pins { }; }; }; + +&pmm8540c_gpios { + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8540e_gpios { + usb3_en_state: usb3-en-state { + pins = "gpio5"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8540g_gpios { + usb4_en_state: usb4-en-state { + pins = "gpio5"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb5_en_state: usb5-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; -- 2.40.0
