Deprecate mediatek,drive-strength-adv which shall not exist, that was an
unnecessary property that leaked upstream from downstream kernels and
there's no reason to use it.
The generic property drive-strength-microamp should be used instead.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
---
.../devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml | 8 ++++++--
.../devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml | 6 +++++-
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index bf67d4672455..ff24cf29eea7 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -110,8 +110,13 @@ patternProperties:
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
mediatek,drive-strength-adv:
+ deprecated: true
description: |
+ DEPRECATED: Please use drive-strength-microamp instead.
Describe the specific driving setup property.
For I2C pins, the existing generic driving setup can only support
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
@@ -217,7 +222,7 @@ examples:
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
<PINMUX_GPIO49__FUNC_SDA5>;
mediatek,pull-up-adv = <3>;
- mediatek,drive-strength-adv = <7>;
+ drive-strength-microamp = <1000>;
};
};
@@ -226,7 +231,6 @@ examples:
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
<PINMUX_GPIO51__FUNC_SDA3>;
mediatek,pull-down-adv = <2>;
- mediatek,drive-strength-adv = <4>;
};
};
};
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
index 5aa8ba4cb547..dce9fd1a6a72 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
@@ -91,8 +91,13 @@ patternProperties:
input-schmitt-disable: true
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
mediatek,drive-strength-adv:
+ deprecated: true
description: |
+ DEPRECATED: Please use drive-strength-microamp instead.
Describe the specific driving setup property.
For I2C pins, the existing generic driving setup can only support
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
@@ -191,7 +196,6 @@ examples:
pins {
pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
mediatek,pull-up-adv = <3>;
- mediatek,drive-strength-adv = <00>;
bias-pull-up;
};
};
--
2.25.1
