Add thermal sensor IP, which allows monitoring temperatures at
seven different places in the SoC:
* Chip Center
* CPU Cluster 1 (Dual A76 "Big" Cores)
* CPU Cluster 2 (Dual A76 "Big" Cores)
* CPU Cluster 0 (Quad A55 "Little" Cores)
* Power Domain Center
* Graphics Processing Unit
* Neural Processing Unit
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
The driver + dt-binding part has been merged by Daniel Lezcano,
so let's add the DT node.
---
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 7840767dfcd8..c51f766cbd2e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -1589,6 +1589,26 @@ pwm15: pwm@febf0030 {
status = "disabled";
};
+ tsadc: tsadc@fec00000 {
+ compatible = "rockchip,rk3588-tsadc";
+ reg = <0x0 0xfec00000 0x0 0x400>;
+ interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ assigned-clocks = <&cru CLK_TSADC>;
+ assigned-clock-rates = <2000000>;
+ resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb", "tsadc";
+ rockchip,hw-tshut-temp = <120000>;
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ pinctrl-0 = <&tsadc_gpio_func>;
+ pinctrl-1 = <&tsadc_shut>;
+ pinctrl-names = "gpio", "otpout";
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
i2c6: i2c@fec80000 {
compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xfec80000 0x0 0x1000>;
--
2.39.2
