Re: [PATCH v2 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 03, 2023 at 03:24:58PM +0200, Krzysztof Kozlowski wrote:
> The port sample interval was always 16-bit, split into low and high
> bytes.  This split was unnecessary, although harmless for older devices
> because all of them used only lower byte (so values < 0xff).  With
> support for Soundwire controller on Qualcomm SM8550 and its devices,
> both bytes will be used, thus add a new 'qcom,ports-sinterval' property
> to allow 16-bit sample intervals.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  .../bindings/soundwire/qcom,soundwire.yaml    | 22 +++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> index c283c594fb5c..883b8be9be1b 100644
> --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> @@ -86,7 +86,7 @@ properties:
>    qcom,ports-sinterval-low:
>      $ref: /schemas/types.yaml#/definitions/uint8-array
>      description:
> -      Sample interval low of each data port.
> +      Sample interval (only lowest byte) of each data port.
>        Out ports followed by In ports. Used for Sample Interval calculation.
>        Value of 0xff indicates that this option is not implemented
>        or applicable for the respective data port.
> @@ -94,6 +94,19 @@ properties:
>      minItems: 3
>      maxItems: 16
>  
> +  qcom,ports-sinterval:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      Sample interval of each data port.
> +      Out ports followed by In ports. Used for Sample Interval calculation.
> +      Value of 0xffff indicates that this option is not implemented
> +      or applicable for the respective data port.
> +      More info in MIPI Alliance SoundWire 1.0 Specifications.
> +    minItems: 3
> +    maxItems: 16
> +    items:
> +      maximum: 0xffff

Why not use uint16-array?

> +
>    qcom,ports-offset1:
>      $ref: /schemas/types.yaml#/definitions/uint8-array
>      description:
> @@ -219,10 +232,15 @@ required:
>    - '#size-cells'
>    - qcom,dout-ports
>    - qcom,din-ports
> -  - qcom,ports-sinterval-low
>    - qcom,ports-offset1
>    - qcom,ports-offset2
>  
> +oneOf:
> +  - required:
> +      - qcom,ports-sinterval-low
> +  - required:
> +      - qcom,ports-sinterval
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux