From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> Remove Thunder Bay specific code as the product got cancelled and there are no end customers or users. Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> --- .../pinctrl/intel,pinctrl-thunderbay.yaml | 120 ------------------ MAINTAINERS | 5 - 2 files changed, 125 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml deleted file mode 100644 index f001add16814..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml +++ /dev/null @@ -1,120 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Intel Thunder Bay pin controller - -maintainers: - - Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> - -description: | - Intel Thunder Bay SoC integrates a pin controller which enables control - of pin directions, input/output values and configuration - for a total of 67 pins. - -properties: - compatible: - const: intel,thunderbay-pinctrl - - reg: - maxItems: 1 - - gpio-controller: true - - '#gpio-cells': - const: 2 - - gpio-ranges: - maxItems: 1 - - interrupts: - description: - Specifies the interrupt lines to be used by the controller. - maxItems: 2 - - interrupt-controller: true - - '#interrupt-cells': - const: 2 - -patternProperties: - '^gpio@[0-9a-f]*$': - type: object - additionalProperties: false - - description: - Child nodes can be specified to contain pin configuration information, - which can then be utilized by pinctrl client devices. - The following properties are supported. - - properties: - pins: - description: | - The name(s) of the pins to be configured in the child node. - Supported pin names are "GPIO0" up to "GPIO66". - - bias-disable: true - - bias-pull-down: true - - bias-pull-up: true - - drive-strength: - description: Drive strength for the pad. - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15] - - bias-bus-hold: - type: boolean - - input-schmitt-enable: - type: boolean - - slew-rate: - description: GPIO slew rate control. - 0 - Slow - 1 - Fast - enum: [0, 1] - -additionalProperties: false - -required: - - compatible - - reg - - gpio-controller - - '#gpio-cells' - - gpio-ranges - - interrupts - - interrupt-controller - - '#interrupt-cells' - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interrupt-controller/irq.h> - // Example 1 - pinctrl0: gpio@0 { - compatible = "intel,thunderbay-pinctrl"; - reg = <0x600b0000 0x88>; - gpio-controller; - #gpio-cells = <0x2>; - gpio-ranges = <&pinctrl0 0 0 67>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - // Example 2 - pinctrl1: gpio@1 { - compatible = "intel,thunderbay-pinctrl"; - reg = <0x600c0000 0x88>; - gpio-controller; - #gpio-cells = <0x2>; - gpio-ranges = <&pinctrl1 0 0 53>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 90abe83c02f3..bae5e92d1ff2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16566,11 +16566,6 @@ L: linux-omap@xxxxxxxxxxxxxxx S: Maintained F: drivers/pinctrl/pinctrl-single.c -PIN CONTROLLER - THUNDERBAY -M: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> -S: Supported -F: drivers/pinctrl/pinctrl-thunderbay.c - PIN CONTROLLER - SUNPLUS / TIBBO M: Dvorkin Dmitry <dvorkin@xxxxxxxxx> M: Wells Lu <wellslutw@xxxxxxxxx> -- 2.17.1
