USB and Power regulator on Exynos7 require gpios available in BUS1 pin controller block. So adding the BUS1 pinctrl support. Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> --- drivers/pinctrl/samsung/pinctrl-exynos.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c index d5d4cfc..caca5b5 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c @@ -1300,6 +1300,13 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c), }; +/* pin banks of exynos7 pin-controller - BUS1 */ +static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = { + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00), + EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20), +}; + const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { { /* pin-controller instance 0 Alive data */ @@ -1342,5 +1349,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { .pin_banks = exynos7_pin_banks7, .nr_banks = ARRAY_SIZE(exynos7_pin_banks7), .eint_gpio_init = exynos_eint_gpio_init, + }, { + /* pin-controller instance 8 BUS1 data */ + .pin_banks = exynos7_pin_banks8, + .nr_banks = ARRAY_SIZE(exynos7_pin_banks8), + .eint_gpio_init = exynos_eint_gpio_init, }, }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html