Re: [PATCH 4/4] arm64: dts: qcom: sm8350-nagara: Unify status property placement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2.04.2023 17:19, Marijn Suijten wrote:
> On 2023-03-21 23:12:31, Konrad Dybcio wrote:
> 
> When you get to resending this, change sm8350-nagara in the title to
> sm8350-sagami :)
Even I confuse them, they just look too alike! ;)

Konrad
> 
> - Marijn
> 
>> As we're heading towards getting the status property last everywhere,
>> take care of it for SM8350 SONY Sagami.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>>  .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi   | 30 ++++++++++------------
>>  1 file changed, 14 insertions(+), 16 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
>> index b2baa81baf5e..95b1ba4ce470 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
>> @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator {
>>  };
>>  
>>  &adsp {
>> -	status = "okay";
>>  	firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
>> +	status = "okay";
>>  };
>>  
>>  &apps_rsc {
>> @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 {
>>  };
>>  
>>  &cdsp {
>> -	status = "okay";
>>  	firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
>> +	status = "okay";
>>  };
>>  
>>  &i2c1 {
>> -	status = "okay";
>>  	clock-frequency = <1000000>;
>> +	status = "okay";
>>  
>>  	/* Some subset of SONY IMX663 camera sensor @ 38 */
>>  };
>>  
>>  &i2c4 {
>> -	status = "okay";
>>  	clock-frequency = <400000>;
>> +	status = "okay";
>>  
>>  	/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
>>  };
>>  
>>  &i2c11 {
>> -	status = "okay";
>>  	clock-frequency = <1000000>;
>> +	status = "okay";
>>  
>>  	cs35l41_l: speaker-amp@40 {
>>  		compatible = "cirrus,cs35l41";
>> @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 {
>>  };
>>  
>>  &i2c12 {
>> -	status = "okay";
>>  	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
>>  	clock-frequency = <100000>;
>> +	status = "okay";
>>  
>>  	/* AMS TCS3490 RGB+IR color sensor @ 72 */
>>  };
>>  
>>  &i2c13 {
>> -	status = "okay";
>>  	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
>>  	clock-frequency = <100000>;
>> +	status = "okay";
>>  
>>  	/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
>>  };
>>  
>>  &i2c15 {
>> -	status = "okay";
>>  	clock-frequency = <400000>;
>> +	status = "okay";
>>  
>>  	/* NXP SN1X0 NFC @ 28 */
>>  };
>>  
>>  &i2c17 {
>> -	status = "okay";
>>  	clock-frequency = <1000000>;
>> +	status = "okay";
>>  
>>  	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
>>  };
>> @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint {
>>  };
>>  
>>  &mpss {
>> -	status = "okay";
>>  	firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
>> +	status = "okay";
>>  };
>>  
>>  &pm8350_gpios {
>> @@ -719,8 +719,8 @@ &pon_pwrkey {
>>  };
>>  
>>  &pon_resin {
>> -	status = "okay";
>>  	linux,code = <KEY_VOLUMEUP>;
>> +	status = "okay";
>>  };
>>  
>>  &qupv3_id_0 {
>> @@ -748,8 +748,8 @@ &sdhc_2 {
>>  };
>>  
>>  &slpi {
>> -	status = "okay";
>>  	firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
>> +	status = "okay";
>>  };
>>  
>>  &spi14 {
>> @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint {
>>  };
>>  
>>  &usb_1_hsphy {
>> -	status = "okay";
>> -
>>  	vdda-pll-supply = <&pm8350_l5>;
>>  	vdda18-supply = <&pm8350c_l1>;
>>  	vdda33-supply = <&pm8350_l2>;
>> +	status = "okay";
>>  };
>>  
>>  &usb_1_qmpphy {
>> -	status = "okay";
>> -
>>  	vdda-phy-supply = <&pm8350_l6>;
>>  	vdda-pll-supply = <&pm8350_l1>;
>> +	status = "okay";
>>  };
>>
>> -- 
>> 2.40.0
>>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux