Hello Ahmad
On 4/3/23 11:28, Ahmad Fatoum wrote:
Hello Alexandre,
On 03.04.23 11:15, Alexandre TORGUE wrote:
On 3/30/23 07:04, Steffen Trumtrar wrote:
Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
stm32m157c-som.
Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
---
[snip]
+/ {
+ model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
+ compatible = "phytec,phycore-stm32mp1-3",
+ "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+ aliases {
+ mmc0 = &sdmmc1;
+ mmc1 = &sdmmc2;
+ mmc2 = &sdmmc3;
mmc aliases are still used in linux?
Since kernel commit fa2d0aa96941 ("mmc: core: Allow setting slot
index via device tree alias") added with v5.10-rc1, aliases
dictate kernel numbering of /dev/mmcblk devices, so it's good
to have these aliases for consistency as the alternative of
using PARTUUID breaks down once the same image is flashed to
both SD and eMMC and use of an initrd is not always practical.
Oh ok. I thought the opposite. Sorry for this mistake.
Cheers
Alex
+&sdmmc1 {
+ secure-status = "disabled";
+};
+
+&sdmmc2 {
+ status = "okay";
+ secure-status = "disabled";
+};
What is the need to put the secure status disabled for SDMMC nodes ?
TF-A parses them, but for SDMMC, it should have no effect, so I agree
they can be removed.
Cheers,
Ahmad
