在 2023/4/2 下午6:04, Krzysztof Kozlowski 写道:
On 01/04/2023 11:56, Yinbo Zhu wrote:
This bus driver supports the Loongson spi hardware controller in the
Loongson platforms and supports to use DTS and PCI framework to
register spi device resources.
Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
---
...
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include "spi-loongson.h"
+
+static inline void loongson_spi_write_reg(struct loongson_spi *spi, unsigned char reg,
+ unsigned char data)
+{
+ writeb(data, spi->base + reg);
This wrapper does not simplify anything.
Mark seems to have other viewpoint.
+}
+
+static inline char loongson_spi_read_reg(struct loongson_spi *spi, unsigned char reg)
+{
+ return readb(spi->base + reg);
Neither this one.
+}
+
+static void loongson_spi_set_cs(struct spi_device *spi, bool val)
+{
+ int cs;
+ struct loongson_spi *loongson_spi = spi_master_get_devdata(spi->master);
+
(...)
+
+static int __init loongson_spi_pci_init(void)
+{
+ int ret;
+
+ ret = pci_register_driver(&loongson_spi_pci_driver);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void __exit loongson_spi_pci_exit(void)
+{
+ pci_unregister_driver(&loongson_spi_pci_driver);
+}
+
+module_init(loongson_spi_pci_init);
+module_exit(loongson_spi_pci_exit);
module_xxx_driver?
okay, I got it.
+
+MODULE_DESCRIPTION("Loongson spi pci driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-loongson-plat.c b/drivers/spi/spi-loongson-plat.c
new file mode 100644
index 000000000000..8f4aa70168f3
--- /dev/null
+++ b/drivers/spi/spi-loongson-plat.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Platform driver for Loongson SPI Support
+// Copyright (C) 2023 Loongson Technology Corporation Limited
+
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include "spi-loongson.h"
+
+static int loongson_spi_platform_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(dev, "cannot get io resource memory\n");
+ return -ENOENT;
+ }
+
+ ret = loongson_spi_init_master(dev, res);
+ if (ret)
+ dev_err(dev, "failed to initialize master\n");
+
+ return ret;
+}
+
+static const struct of_device_id loongson_spi_id_table[] = {
+ { .compatible = "loongson,ls2k-spi", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, loongson_spi_id_table);
+
+static struct platform_driver loongson_spi_plat_driver = {
+ .probe = loongson_spi_platform_probe,
+ .driver = {
+ .name = "loongson-spi",
+ .owner = THIS_MODULE,
Really? We get rid of it years ago. I bet you did not run coccicheck,
smatch, sparse...
okay, I got it, I will remove this line.
Thanks.
+ .bus = &platform_bus_type,
+ .pm = &loongson_spi_dev_pm_ops,
+ .of_match_table = loongson_spi_id_table,
+ },
+};
+
+static int __init loongson_spi_plat_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&loongson_spi_plat_driver);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void __exit loongson_spi_plat_exit(void)
+{
+ platform_driver_unregister(&loongson_spi_plat_driver);
+}
+
+module_init(loongson_spi_plat_init);
+module_exit(loongson_spi_plat_exit);
module_platform_driver.
okay, I will use it.
+
+MODULE_DESCRIPTION("Loongson spi platform driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-loongson.h b/drivers/spi/spi-loongson.h
new file mode 100644
index 000000000000..44818340188d
--- /dev/null
+++ b/drivers/spi/spi-loongson.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Header File for Loongson SPI Driver. */
+/* Copyright (C) 2023 Loongson Technology Corporation Limited */
+
+#ifndef __LINUX_SPI_LOONGSON_H
+#define __LINUX_SPI_LOONGSON_H
+
+#define LOONGSON_SPI_SPCR_REG 0x00
There is just one space after #define.
Mark seems to have other viewpoint.
Best regards,
Krzysztof
