From: Peng Fan <peng.fan@xxxxxxx>
When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
drivers/clk/imx/clk-fracn-gppll.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index ec50c41e2a4c..f6674110a88e 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -15,6 +15,7 @@
#include "clk.h"
#define PLL_CTRL 0x0
+#define HW_CTRL_SEL BIT(16)
#define CLKMUX_BYPASS BIT(2)
#define CLKMUX_EN BIT(1)
#define POWERUP_MASK BIT(0)
@@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
rate = imx_get_pll_settings(pll, drate);
+ /* Hardware control select disable. PLL is control by register */
+ tmp = readl_relaxed(pll->base + PLL_CTRL);
+ tmp &= ~HW_CTRL_SEL;
+ writel_relaxed(tmp, pll->base + PLL_CTRL);
+
/* Disable output */
tmp = readl_relaxed(pll->base + PLL_CTRL);
tmp &= ~CLKMUX_EN;
--
2.37.1
