[PATCH v2 21/22] arch: arm64: dts: qcom: pm8150: support SID greater that 9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Supporting SIDs greater than 9 required additional handling in order to
properly generatae hex values. Apply this customization to pm8150.dtsi.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi          | 16 ++++++++--------
 arch/arm64/boot/dts/qcom/pmic-dyn-footer.dtsi |  6 ++++++
 arch/arm64/boot/dts/qcom/pmic-dyn-header.dtsi |  6 ++++++
 3 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 77bb325e425b..37cc99e5d1a6 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -58,7 +58,7 @@ trip2 {
 &spmi_bus {
 	pmic@0 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <PMIC_SID SPMI_USID>;
+		reg = <PMIC_SID_HEX SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -70,7 +70,7 @@ pon: pon@800 {
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <PMIC_SID 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMIC_SID_HEX 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
@@ -80,7 +80,7 @@ pon_pwrkey: pwrkey {
 
 			pon_resin: resin {
 				compatible = "qcom,pm8941-resin";
-				interrupts = <PMIC_SID 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMIC_SID_HEX 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
 				bias-pull-up;
 
@@ -91,7 +91,7 @@ pon_resin: resin {
 		LABEL(temp): temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
-			interrupts = <PMIC_SID 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMIC_SID_HEX 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			io-channels = <&LABEL(adc) ADC5_DIE_TEMP>;
 			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
@@ -103,7 +103,7 @@ LABEL(adc): adc@3100 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
-			interrupts = <PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMIC_SID_HEX 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
@@ -127,7 +127,7 @@ die-temp@6 {
 		LABEL(adc_tm): adc-tm@3500 {
 			compatible = "qcom,spmi-adc-tm5";
 			reg = <0x3500>;
-			interrupts = <PMIC_SID 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMIC_SID_HEX 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 			#thermal-sensor-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -138,7 +138,7 @@ rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
 			reg-names = "rtc", "alarm";
-			interrupts = <PMIC_SID 0x61 0x1 IRQ_TYPE_NONE>;
+			interrupts = <PMIC_SID_HEX 0x61 0x1 IRQ_TYPE_NONE>;
 		};
 
 		LABEL(gpios): gpio@c000 {
@@ -154,7 +154,7 @@ LABEL(gpios): gpio@c000 {
 
 	pmic@PMIC_SID1 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
-		reg = <PMIC_SID1 SPMI_USID>;
+		reg = <PMIC_SID1_HEX SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/pmic-dyn-footer.dtsi b/arch/arm64/boot/dts/qcom/pmic-dyn-footer.dtsi
index 83a2bada48ff..f3743ef3aa13 100644
--- a/arch/arm64/boot/dts/qcom/pmic-dyn-footer.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmic-dyn-footer.dtsi
@@ -11,6 +11,12 @@
 
 #undef NODE
 
+#undef HEX
+#undef _HEX
+
+#undef PMIC_SID_HEX
+#undef PMIC_SID1_HEX
+
 #undef PMIC_SID
 #undef PMIC_SID1
 #undef PMIC_LABEL
diff --git a/arch/arm64/boot/dts/qcom/pmic-dyn-header.dtsi b/arch/arm64/boot/dts/qcom/pmic-dyn-header.dtsi
index bb41c9387aba..640d1bf5ce8e 100644
--- a/arch/arm64/boot/dts/qcom/pmic-dyn-header.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmic-dyn-header.dtsi
@@ -18,3 +18,9 @@
 #define __LABEL(pmic, name) pmic ## _ ## name
 
 #define NODE(name) PMIC_NODE ##-##  name
+
+#define HEX(sid) _HEX(sid)
+#define _HEX(sid) 0x## sid
+
+#define PMIC_SID_HEX HEX(PMIC_SID)
+#define PMIC_SID1_HEX HEX(PMIC_SID1)
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux