Even this binding look trivial, the actual hardware supports more features (e.g. sleep mode control GPIO). So add this as a dedicated devicetree binding for the Maxim DS2482/DS2484 I2C to 1-W bridges, which can be extended later. Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxxxxxxxx> --- .../devicetree/bindings/w1/maxim,ds2482.yaml | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/w1/maxim,ds2482.yaml diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml new file mode 100644 index 000000000000..fd692a3a7400 --- /dev/null +++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/maxim,ds2482.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim One wire bus master controller + +maintainers: + - Stefan Wahren <stefan.wahren@xxxxxxxxxxxxxx> + +description: | + I2C to 1-wire bridges + + https://www.analog.com/media/en/technical-documentation/data-sheets/ds2482-100.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS2482-800.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS2484.pdf + +properties: + compatible: + enum: + - maxim,ds2482 + - maxim,ds2484 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + }; -- 2.17.1
