Re: [PATCH RFC 16/20] power: reset: oxnas-restart: remove obsolete restart driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Mar 31, 2023 at 10:34:54AM +0200, Neil Armstrong wrote:
> Due to lack of maintainance and stall of development for a few years now,
> and since no new features will ever be added upstream, remove support
> for OX810 and OX820 restart feature.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>

-- Sebastian

>  drivers/power/reset/Kconfig         |   7 --
>  drivers/power/reset/Makefile        |   1 -
>  drivers/power/reset/oxnas-restart.c | 233 ------------------------------------
>  3 files changed, 241 deletions(-)
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 8c87eeda0fec..cc734c1fe4c0 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -148,13 +148,6 @@ config POWER_RESET_ODROID_GO_ULTRA_POWEROFF
>  	help
>  	  This driver supports Power off for Odroid Go Ultra device.
>  
> -config POWER_RESET_OXNAS
> -	bool "OXNAS SoC restart driver"
> -	depends on ARCH_OXNAS
> -	default MACH_OX820
> -	help
> -	  Restart support for OXNAS/PLXTECH OX820 SoC.
> -
>  config POWER_RESET_PIIX4_POWEROFF
>  	tristate "Intel PIIX4 power-off driver"
>  	depends on PCI
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index d763e6735ee3..a95d1bd275d1 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -14,7 +14,6 @@ obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
>  obj-$(CONFIG_POWER_RESET_LINKSTATION) += linkstation-poweroff.o
>  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
>  obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
> -obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
>  obj-$(CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF) += odroid-go-ultra-poweroff.o
> diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c
> deleted file mode 100644
> index 13090bec058a..000000000000
> --- a/drivers/power/reset/oxnas-restart.c
> +++ /dev/null
> @@ -1,233 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0)
> -/*
> - * oxnas SoC reset driver
> - * based on:
> - * Microsemi MIPS SoC reset driver
> - * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@xxxxxxxxx>
> - *
> - * Copyright (c) 2013 Ma Hajun <mahaijuns@xxxxxxxxx>
> - * Copyright (c) 2017 Microsemi Corporation
> - * Copyright (c) 2020 Daniel Golle <daniel@xxxxxxxxxxxxxx>
> - */
> -#include <linux/delay.h>
> -#include <linux/io.h>
> -#include <linux/notifier.h>
> -#include <linux/mfd/syscon.h>
> -#include <linux/of_address.h>
> -#include <linux/of_device.h>
> -#include <linux/platform_device.h>
> -#include <linux/reboot.h>
> -#include <linux/regmap.h>
> -
> -/* bit numbers of reset control register */
> -#define OX820_SYS_CTRL_RST_SCU                0
> -#define OX820_SYS_CTRL_RST_COPRO              1
> -#define OX820_SYS_CTRL_RST_ARM0               2
> -#define OX820_SYS_CTRL_RST_ARM1               3
> -#define OX820_SYS_CTRL_RST_USBHS              4
> -#define OX820_SYS_CTRL_RST_USBHSPHYA          5
> -#define OX820_SYS_CTRL_RST_MACA               6
> -#define OX820_SYS_CTRL_RST_MAC                OX820_SYS_CTRL_RST_MACA
> -#define OX820_SYS_CTRL_RST_PCIEA              7
> -#define OX820_SYS_CTRL_RST_SGDMA              8
> -#define OX820_SYS_CTRL_RST_CIPHER             9
> -#define OX820_SYS_CTRL_RST_DDR                10
> -#define OX820_SYS_CTRL_RST_SATA               11
> -#define OX820_SYS_CTRL_RST_SATA_LINK          12
> -#define OX820_SYS_CTRL_RST_SATA_PHY           13
> -#define OX820_SYS_CTRL_RST_PCIEPHY            14
> -#define OX820_SYS_CTRL_RST_STATIC             15
> -#define OX820_SYS_CTRL_RST_GPIO               16
> -#define OX820_SYS_CTRL_RST_UART1              17
> -#define OX820_SYS_CTRL_RST_UART2              18
> -#define OX820_SYS_CTRL_RST_MISC               19
> -#define OX820_SYS_CTRL_RST_I2S                20
> -#define OX820_SYS_CTRL_RST_SD                 21
> -#define OX820_SYS_CTRL_RST_MACB               22
> -#define OX820_SYS_CTRL_RST_PCIEB              23
> -#define OX820_SYS_CTRL_RST_VIDEO              24
> -#define OX820_SYS_CTRL_RST_DDR_PHY            25
> -#define OX820_SYS_CTRL_RST_USBHSPHYB          26
> -#define OX820_SYS_CTRL_RST_USBDEV             27
> -#define OX820_SYS_CTRL_RST_ARMDBG             29
> -#define OX820_SYS_CTRL_RST_PLLA               30
> -#define OX820_SYS_CTRL_RST_PLLB               31
> -
> -/* bit numbers of clock control register */
> -#define OX820_SYS_CTRL_CLK_COPRO              0
> -#define OX820_SYS_CTRL_CLK_DMA                1
> -#define OX820_SYS_CTRL_CLK_CIPHER             2
> -#define OX820_SYS_CTRL_CLK_SD                 3
> -#define OX820_SYS_CTRL_CLK_SATA               4
> -#define OX820_SYS_CTRL_CLK_I2S                5
> -#define OX820_SYS_CTRL_CLK_USBHS              6
> -#define OX820_SYS_CTRL_CLK_MACA               7
> -#define OX820_SYS_CTRL_CLK_MAC                OX820_SYS_CTRL_CLK_MACA
> -#define OX820_SYS_CTRL_CLK_PCIEA              8
> -#define OX820_SYS_CTRL_CLK_STATIC             9
> -#define OX820_SYS_CTRL_CLK_MACB               10
> -#define OX820_SYS_CTRL_CLK_PCIEB              11
> -#define OX820_SYS_CTRL_CLK_REF600             12
> -#define OX820_SYS_CTRL_CLK_USBDEV             13
> -#define OX820_SYS_CTRL_CLK_DDR                14
> -#define OX820_SYS_CTRL_CLK_DDRPHY             15
> -#define OX820_SYS_CTRL_CLK_DDRCK              16
> -
> -/* Regmap offsets */
> -#define OX820_CLK_SET_REGOFFSET               0x2c
> -#define OX820_CLK_CLR_REGOFFSET               0x30
> -#define OX820_RST_SET_REGOFFSET               0x34
> -#define OX820_RST_CLR_REGOFFSET               0x38
> -#define OX820_SECONDARY_SEL_REGOFFSET         0x14
> -#define OX820_TERTIARY_SEL_REGOFFSET          0x8c
> -#define OX820_QUATERNARY_SEL_REGOFFSET        0x94
> -#define OX820_DEBUG_SEL_REGOFFSET             0x9c
> -#define OX820_ALTERNATIVE_SEL_REGOFFSET       0xa4
> -#define OX820_PULLUP_SEL_REGOFFSET            0xac
> -#define OX820_SEC_SECONDARY_SEL_REGOFFSET     0x100014
> -#define OX820_SEC_TERTIARY_SEL_REGOFFSET      0x10008c
> -#define OX820_SEC_QUATERNARY_SEL_REGOFFSET    0x100094
> -#define OX820_SEC_DEBUG_SEL_REGOFFSET         0x10009c
> -#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET   0x1000a4
> -#define OX820_SEC_PULLUP_SEL_REGOFFSET        0x1000ac
> -
> -struct oxnas_restart_context {
> -	struct regmap *sys_ctrl;
> -	struct notifier_block restart_handler;
> -};
> -
> -static int ox820_restart_handle(struct notifier_block *this,
> -				 unsigned long mode, void *cmd)
> -{
> -	struct oxnas_restart_context *ctx = container_of(this, struct
> -							oxnas_restart_context,
> -							restart_handler);
> -	u32 value;
> -
> -	/*
> -	 * Assert reset to cores as per power on defaults
> -	 * Don't touch the DDR interface as things will come to an impromptu
> -	 * stop NB Possibly should be asserting reset for PLLB, but there are
> -	 * timing concerns here according to the docs
> -	 */
> -	value = BIT(OX820_SYS_CTRL_RST_COPRO)		|
> -		BIT(OX820_SYS_CTRL_RST_USBHS)		|
> -		BIT(OX820_SYS_CTRL_RST_USBHSPHYA)	|
> -		BIT(OX820_SYS_CTRL_RST_MACA)		|
> -		BIT(OX820_SYS_CTRL_RST_PCIEA)		|
> -		BIT(OX820_SYS_CTRL_RST_SGDMA)		|
> -		BIT(OX820_SYS_CTRL_RST_CIPHER)		|
> -		BIT(OX820_SYS_CTRL_RST_SATA)		|
> -		BIT(OX820_SYS_CTRL_RST_SATA_LINK)	|
> -		BIT(OX820_SYS_CTRL_RST_SATA_PHY)	|
> -		BIT(OX820_SYS_CTRL_RST_PCIEPHY)		|
> -		BIT(OX820_SYS_CTRL_RST_STATIC)		|
> -		BIT(OX820_SYS_CTRL_RST_UART1)		|
> -		BIT(OX820_SYS_CTRL_RST_UART2)		|
> -		BIT(OX820_SYS_CTRL_RST_MISC)		|
> -		BIT(OX820_SYS_CTRL_RST_I2S)		|
> -		BIT(OX820_SYS_CTRL_RST_SD)		|
> -		BIT(OX820_SYS_CTRL_RST_MACB)		|
> -		BIT(OX820_SYS_CTRL_RST_PCIEB)		|
> -		BIT(OX820_SYS_CTRL_RST_VIDEO)		|
> -		BIT(OX820_SYS_CTRL_RST_USBHSPHYB)	|
> -		BIT(OX820_SYS_CTRL_RST_USBDEV);
> -
> -	regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
> -
> -	/* Release reset to cores as per power on defaults */
> -	regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET,
> -			BIT(OX820_SYS_CTRL_RST_GPIO));
> -
> -	/*
> -	 * Disable clocks to cores as per power-on defaults - must leave DDR
> -	 * related clocks enabled otherwise we'll stop rather abruptly.
> -	 */
> -	value = BIT(OX820_SYS_CTRL_CLK_COPRO)		|
> -		BIT(OX820_SYS_CTRL_CLK_DMA)		|
> -		BIT(OX820_SYS_CTRL_CLK_CIPHER)		|
> -		BIT(OX820_SYS_CTRL_CLK_SD)		|
> -		BIT(OX820_SYS_CTRL_CLK_SATA)		|
> -		BIT(OX820_SYS_CTRL_CLK_I2S)		|
> -		BIT(OX820_SYS_CTRL_CLK_USBHS)		|
> -		BIT(OX820_SYS_CTRL_CLK_MAC)		|
> -		BIT(OX820_SYS_CTRL_CLK_PCIEA)		|
> -		BIT(OX820_SYS_CTRL_CLK_STATIC)		|
> -		BIT(OX820_SYS_CTRL_CLK_MACB)		|
> -		BIT(OX820_SYS_CTRL_CLK_PCIEB)		|
> -		BIT(OX820_SYS_CTRL_CLK_REF600)		|
> -		BIT(OX820_SYS_CTRL_CLK_USBDEV);
> -
> -	regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
> -
> -	/* Enable clocks to cores as per power-on defaults */
> -
> -	/* Set sys-control pin mux'ing as per power-on defaults */
> -	regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
> -
> -	regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
> -	regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
> -
> -	/*
> -	 * No need to save any state, as the ROM loader can determine whether
> -	 * reset is due to power cycling or programatic action, just hit the
> -	 * (self-clearing) CPU reset bit of the block reset register
> -	 */
> -	value =
> -		BIT(OX820_SYS_CTRL_RST_SCU) |
> -		BIT(OX820_SYS_CTRL_RST_ARM0) |
> -		BIT(OX820_SYS_CTRL_RST_ARM1);
> -
> -	regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
> -
> -	pr_emerg("Unable to restart system\n");
> -	return NOTIFY_DONE;
> -}
> -
> -static int ox820_restart_probe(struct platform_device *pdev)
> -{
> -	struct oxnas_restart_context *ctx;
> -	struct regmap *sys_ctrl;
> -	struct device *dev = &pdev->dev;
> -	int err = 0;
> -
> -	sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
> -	if (IS_ERR(sys_ctrl))
> -		return PTR_ERR(sys_ctrl);
> -
> -	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
> -	if (!ctx)
> -		return -ENOMEM;
> -
> -	ctx->sys_ctrl = sys_ctrl;
> -	ctx->restart_handler.notifier_call = ox820_restart_handle;
> -	ctx->restart_handler.priority = 192;
> -	err = register_restart_handler(&ctx->restart_handler);
> -	if (err)
> -		dev_err(dev, "can't register restart notifier (err=%d)\n", err);
> -
> -	return err;
> -}
> -
> -static const struct of_device_id ox820_restart_of_match[] = {
> -	{ .compatible = "oxsemi,ox820-sys-ctrl" },
> -	{}
> -};
> -
> -static struct platform_driver ox820_restart_driver = {
> -	.probe = ox820_restart_probe,
> -	.driver = {
> -		.name = "ox820-chip-reset",
> -		.of_match_table = ox820_restart_of_match,
> -	},
> -};
> -builtin_platform_driver(ox820_restart_driver);
> 
> -- 
> 2.34.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux