From: Matt Ranostay <mranostay@xxxxxx> Add dt node for the single instance of WIZ (SERDES wrapper) and SERDES module shared by PCIe, eDP and USB. Signed-off-by: Matt Ranostay <mranostay@xxxxxx> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx> --- I had reviewed this patch in the v7 series [0]. Since I'm taking over upstreaming this series, I removed the self Reviewed-by tag. [0] - https://lore.kernel.org/lkml/4173e0c6-61d9-5b79-44ec-317870de070b@xxxxxx/ Changes from v13: * No changes. Only rebased on top of linux-next Changes from v12: * Disabled only nodes that need additional info Changes from v11: * Cleaned up comments Changes from v10: * Fixed dtbs warnings by adding "reg" property to the mux-controller nodes * Documented the reason for disabling the nodes by default * Removed Link tag from commit message Changes from v9: * Disabled serdes related nodes by default in common DT file Changes from v8: * No change Changes from v7: * Updated mux-controller node name Changes from v6: * Fixed the incorrect "compatible" property Changes from v5: * Removed Cc tag from commit message Changes from v4: * No change Changes from v3: * No change Changes from v2: * Reworked SERDES + WIZ enablement patchset to use properies for clocks defines versus entire devicetree nodes. Results in cleaner code that doesn't break dt-schema or the driver functionality. Changes from v1: * Update mux-controller node name arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 8d7b64728f88..931263919086 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -5,6 +5,17 @@ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy-ti.h> + +/ { + serdes_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -39,6 +50,14 @@ #mux-control-cells = <1>; mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ }; + + serdes_ln_ctrl: mux-controller@80 { + compatible = "mmio-mux"; + reg = <0x80 0x10>; + #mux-control-cells = <1>; + mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ + <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ + }; }; gic500: interrupt-controller@1800000 { @@ -790,6 +809,44 @@ }; }; + serdes_wiz0: wiz@5060000 { + compatible = "ti,j721s2-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x5060000 0x0 0x5060000 0x10000>; + + assigned-clocks = <&k3_clks 365 3>; + assigned-clock-parents = <&k3_clks 365 7>; + + serdes0: serdes@5060000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05060000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 365 3>, + <&k3_clks 365 3>, + <&k3_clks 365 3>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + status = "disabled"; /* Needs lane config */ + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, -- 2.17.1
