Re: [PATCH v4 2/3] media: dt-bindings: ov2685: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Luca,

Thanks for the patch.

On Thu, Mar 23, 2023 at 06:57:50PM +0100, Luca Weiss wrote:
> Convert the text-based dt-bindings to yaml.
> 
> Changes from original txt:
> * Take wording for various properties from other yaml bindings, this
>   removes e.g. volt amount from schema since it isn't really relevant
>   and the datasheet is a better source.
> * Don't make reset-gpios a required property since it can be tied to
>   DOVDD instead.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
>  .../devicetree/bindings/media/i2c/ov2685.txt       |  41 ---------
>  .../devicetree/bindings/media/i2c/ovti,ov2685.yaml | 101 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  3 files changed, 102 insertions(+), 41 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
> deleted file mode 100644
> index 625c4a8c0d53d..0000000000000
> --- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -* Omnivision OV2685 MIPI CSI-2 sensor
> -
> -Required Properties:
> -- compatible: shall be "ovti,ov2685"
> -- clocks: reference to the xvclk input clock
> -- clock-names: shall be "xvclk"
> -- avdd-supply: Analog voltage supply, 2.8 volts
> -- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> -- dvdd-supply: Digital core voltage supply, 1.8 volts
> -- reset-gpios: Low active reset gpio
> -
> -The device node shall contain one 'port' child node with an
> -'endpoint' subnode for its digital output video port,
> -in accordance with the video interface bindings defined in
> -Documentation/devicetree/bindings/media/video-interfaces.txt.
> -The endpoint optional property 'data-lanes' shall be "<1>".
> -
> -Example:
> -&i2c7 {
> -	ov2685: camera-sensor@3c {
> -		compatible = "ovti,ov2685";
> -		reg = <0x3c>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&clk_24m_cam>;
> -
> -		clocks = <&cru SCLK_TESTCLKOUT1>;
> -		clock-names = "xvclk";
> -
> -		avdd-supply = <&pp2800_cam>;
> -		dovdd-supply = <&pp1800>;
> -		dvdd-supply = <&pp1800>;
> -		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> -
> -		port {
> -			ucam_out: endpoint {
> -				remote-endpoint = <&mipi_in_ucam>;
> -				data-lanes = <1>;
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> new file mode 100644
> index 0000000000000..2ac0ca8a0413b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV2685 Image Sensor
> +
> +maintainers:
> +  - Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: ovti,ov2685
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XVCLK clock
> +
> +  clock-names:
> +    items:
> +      - const: xvclk
> +
> +  dvdd-supply:
> +    description: Digital Domain Power Supply
> +
> +  avdd-supply:
> +    description: Analog Domain Power Supply
> +
> +  dovdd-supply:
> +    description: I/O Domain Power Supply
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: Reset Pin GPIO Control (active low)
> +
> +  port:
> +    description: MIPI CSI-2 transmitter port
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            maxItems: 1

This should be 2 --- the sensor supports two lanes (even if the driver
doesn't).

I can address this when applying if that's ok.

> +
> +        required:
> +          - data-lanes
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - dvdd-supply
> +  - avdd-supply
> +  - dovdd-supply
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3399-cru.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov2685: camera-sensor@3c {
> +            compatible = "ovti,ov2685";
> +            reg = <0x3c>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&clk_24m_cam>;
> +
> +            clocks = <&cru SCLK_TESTCLKOUT1>;
> +            clock-names = "xvclk";
> +
> +            avdd-supply = <&pp2800_cam>;
> +            dovdd-supply = <&pp1800>;
> +            dvdd-supply = <&pp1800>;
> +            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                ucam_out: endpoint {
> +                    remote-endpoint = <&mipi_in_ucam>;
> +                    data-lanes = <1>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8ea325040f355..5904f47756fe1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15410,6 +15410,7 @@ M:	Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
>  L:	linux-media@xxxxxxxxxxxxxxx
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
> +F:	Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
>  F:	drivers/media/i2c/ov2685.c
>  
>  OMNIVISION OV2740 SENSOR DRIVER
> 

-- 
Kind regards,

Sakari Ailus



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux