Re: [PATCH v5 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 30, 2023 at 04:09:41PM +0300, Dmitry Baryshkov wrote:
> On Thu, 30 Mar 2023 at 15:58, Varadarajan Narayanan
> <quic_varada@xxxxxxxxxxx> wrote:
> >
> > On Thu, Mar 30, 2023 at 12:41:08PM +0300, Dmitry Baryshkov wrote:
> > > On Thu, 30 Mar 2023 at 11:42, Varadarajan Narayanan
> > > <quic_varada@xxxxxxxxxxx> wrote:
> > > >
> > > > Updated USB QMP PHY Init sequence based on HPG for IPQ9574.
> > > > Reused clock and reset list from existing targets.
> > > >
> > > > Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> > > > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > > > ---
> > > >  Changes in v5:
> > > >         - Fix additional review comments
> > > >         - Use V3 register offsets
> > > >  Changes in v4:
> > > >         - Use qmp_usb_offsets for register space access
> > > >  Changes in v3:
> > > >         - Fix hex captitalization
> > > >  Changes in v2:
> > > >         - Removed unused phy register offsets
> > > >         - Moved the clock entries to the correct place
> > > >         - Maintain sorted order
> > > > ---
> > > >  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++++++++++++++
> > > >  1 file changed, 115 insertions(+)
> > > >
> > > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> > > > index a49711c..77041dd 100644
> > > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> > > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> > > > @@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
> > > >         [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
> > > >  };
> > > >
> > > > +static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
> > > > +       /* PLL and Loop filter settings */
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
> > > > +       /* SSC settings */
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05),
> > > > +};
> > > > +
> > > > +static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = {
> > > > +       QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
> > > > +};
> > > > +
> > > > +static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = {
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
> > > > +       QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c),
> > > > +};
> > > > +
> > > > +static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = {
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
> > > > +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
> > > > +};
> > > > +
> > > >  static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
> > > >         QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
> > > >         QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
> > > > @@ -1558,6 +1640,14 @@ static const char * const qmp_phy_vreg_l[] = {
> > > >         "vdda-phy", "vdda-pll",
> > > >  };
> > > >
> > > > +static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
> > > > +       .serdes         = 0,
> > > > +       .pcs            = 0x800,
> > > > +       .pcs_usb        = 0,
> > >
> > > No, pcs_usb is not 0.
> >
> > Not sure I understand this comment.
> >
> > Since IPQ9574 uses new style DT entries, pcs_usb_offset = 0 and
> > that will not be used.
> >
> > qmp->pcs_usb is used in qmp_usb_enable_autonomous_mode and
> > qmp_usb_disable_autonomous_mode. If "qmp->pcs_usb == 0", those
> > functions use the value of qmp->pcs (0x7d800) for pcs_usb.
>
> So, you mixed qmp->pcs_usb and offsets->pcs_usb here. They are not equal.

Got it. Thanks.
Will set pcs_usb to 0x800, that way the register offsets will get
calculated properly.

Thanks
Varada

> > The registers used in these functions are
> > QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR & QPHY_PCS_AUTONOMOUS_MODE_CTRL
> >
> > The offsets for the above registers as specified in
> > qmp_v3_usb3phy_regs_layout is
> >
> >         #define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL        0x0d8
> >         #define QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR       0x0dc
> >
> > qphy_{set|clr}bits called from qmp_usb_enable_autonomous_mode and
> > qmp_usb_disable_autonomous_mode will use the offset 0x7d8d8 and
> > 0x78d8c. This offset matches with the register offset document of
> > the IPQ9574. So, felt setting pcs_usb to zero should be ok. Can
> > you please clarify.
>
> And this tells you what pcs_usb offset is.
>
> >
> > Thanks
> > Varada
> >
> >
> > >
> > > > +       .tx             = 0x200,
> > > > +       .rx             = 0x400,
> > > > +};
> > > > +
> > > >  static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
> > > >         .serdes         = 0,
> > > >         .pcs            = 0x0200,
> > > > @@ -1586,6 +1676,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> > > >         .regs                   = qmp_v3_usb3phy_regs_layout,
> > > >  };
> > > >
> > > > +static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
> > > > +       .lanes                  = 1,
> > > > +
> > > > +       .offsets                = &qmp_usb_offsets_ipq9574,
> > > > +
> > > > +       .serdes_tbl             = ipq9574_usb3_serdes_tbl,
> > > > +       .serdes_tbl_num         = ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
> > > > +       .tx_tbl                 = ipq9574_usb3_tx_tbl,
> > > > +       .tx_tbl_num             = ARRAY_SIZE(ipq9574_usb3_tx_tbl),
> > > > +       .rx_tbl                 = ipq9574_usb3_rx_tbl,
> > > > +       .rx_tbl_num             = ARRAY_SIZE(ipq9574_usb3_rx_tbl),
> > > > +       .pcs_tbl                = ipq9574_usb3_pcs_tbl,
> > > > +       .pcs_tbl_num            = ARRAY_SIZE(ipq9574_usb3_pcs_tbl),
> > > > +       .clk_list               = qmp_v4_phy_clk_l,
> > > > +       .num_clks               = ARRAY_SIZE(qmp_v4_phy_clk_l),
> > > > +       .reset_list             = qcm2290_usb3phy_reset_l,
> > > > +       .num_resets             = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
> > > > +       .vreg_list              = qmp_phy_vreg_l,
> > > > +       .num_vregs              = ARRAY_SIZE(qmp_phy_vreg_l),
> > > > +       .regs                   = qmp_v3_usb3phy_regs_layout,
> > > > +};
> > > > +
> > > >  static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> > > >         .lanes                  = 1,
> > > >
> > > > @@ -2589,6 +2701,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
> > > >                 .compatible = "qcom,ipq8074-qmp-usb3-phy",
> > > >                 .data = &ipq8074_usb3phy_cfg,
> > > >         }, {
> > > > +               .compatible = "qcom,ipq9574-qmp-usb3-phy",
> > > > +               .data = &ipq9574_usb3phy_cfg,
> > > > +       }, {
> > > >                 .compatible = "qcom,msm8996-qmp-usb3-phy",
> > > >                 .data = &msm8996_usb3phy_cfg,
> > > >         }, {
> > > > --
> > > > 2.7.4
> > > >
> > >
> > >
> > > --
> > > With best wishes
> > > Dmitry
>
>
>
> --
> With best wishes
> Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux