Re: [PATCH v6 02/19] clk: mediatek: Add MT8188 apmixedsys clock support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2023-03-14 at 10:05 +0100, AngeloGioacchino Del Regno wrote:
> Il 09/03/23 14:54, Garmin.Chang ha scritto:
> > Add MT8188 apmixedsys clock controller which provides Plls
> > generated from SoC 26m and ssusb clock gate control.
> > 
> > Signed-off-by: Garmin.Chang <Garmin.Chang@xxxxxxxxxxxx>
> > ---
> >   drivers/clk/mediatek/Kconfig                 |  11 ++
> >   drivers/clk/mediatek/Makefile                |   1 +
> >   drivers/clk/mediatek/clk-mt8188-apmixedsys.c | 154
> > +++++++++++++++++++
> >   3 files changed, 166 insertions(+)
> >   create mode 100644 drivers/clk/mediatek/clk-mt8188-apmixedsys.c
> > 
> > diff --git a/drivers/clk/mediatek/Kconfig
> > b/drivers/clk/mediatek/Kconfig
> > index 2d14855dd37e..d7115089c4f6 100644
> > --- a/drivers/clk/mediatek/Kconfig
> > +++ b/drivers/clk/mediatek/Kconfig
> > @@ -604,6 +604,17 @@ config COMMON_CLK_MT8186
> >   	help
> >   	  This driver supports MediaTek MT8186 clocks.
> >   
> > +config COMMON_CLK_MT8188
> > +	bool "Clock driver for MediaTek MT8188"
> 
> this can be a tristate.
> 
> > +	depends on ARM64 || COMPILE_TEST
> > +	select COMMON_CLK_MEDIATEK
> > +	default ARCH_MEDIATEK
> > +	help
> > +	  This driver supports MediaTek MT8188 basic clocks and clocks
> > +	  required for various peripheral found on MediaTek. Choose
> > +	  M or Y here if you want to use clocks such as peri_ao,
> > +	  infra_ao, etc.
> > +
> >   config COMMON_CLK_MT8192
> >   	bool "Clock driver for MediaTek MT8192"
> >   	depends on ARM64 || COMPILE_TEST
> > diff --git a/drivers/clk/mediatek/Makefile
> > b/drivers/clk/mediatek/Makefile
> > index e5d018270ed0..1f822fcf6084 100644
> > --- a/drivers/clk/mediatek/Makefile
> > +++ b/drivers/clk/mediatek/Makefile
> > @@ -91,6 +91,7 @@ obj-$(CONFIG_COMMON_CLK_MT8186) += clk-mt8186-
> > mcu.o clk-mt8186-topckgen.o clk-mt
> >   				   clk-mt8186-mfg.o clk-mt8186-mm.o
> > clk-mt8186-wpe.o \
> >   				   clk-mt8186-img.o clk-mt8186-vdec.o
> > clk-mt8186-venc.o \
> >   				   clk-mt8186-cam.o clk-mt8186-mdp.o
> > clk-mt8186-ipe.o
> > +obj-$(CONFIG_COMMON_CLK_MT8188) += clk-mt8188-apmixedsys.o
> >   obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192.o
> >   obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
> >   obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
> > diff --git a/drivers/clk/mediatek/clk-mt8188-apmixedsys.c
> > b/drivers/clk/mediatek/clk-mt8188-apmixedsys.c
> > new file mode 100644
> > index 000000000000..db64340386d9
> > --- /dev/null
> > +++ b/drivers/clk/mediatek/clk-mt8188-apmixedsys.c
> > @@ -0,0 +1,154 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> 
> // SPDX ...
> /*
>   * Copyright ...
>   * Author ..
>   */
> 
> > +//
> > +// Copyright (c) 2022 MediaTek Inc.
> > +// Author: Garmin Chang <garmin.chang@xxxxxxxxxxxx>
> > +
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> 
> Please order by name: dt-bindings goes first.
> 
Thank you for your suggestions.

Ok, I would modify this and below in v7.
> > +
> > +#include "clk-gate.h"
> > +#include "clk-mtk.h"
> > +#include "clk-pll.h"
> > +
> > +static const struct mtk_gate_regs apmixed_cg_regs = {
> > +	.set_ofs = 0x8,
> > +	.clr_ofs = 0x8,
> > +	.sta_ofs = 0x8,
> > +};
> > +
> > +#define GATE_APMIXED(_id, _name, _parent, _shift)			
> > \
> > +	GATE_MTK(_id, _name, _parent, &apmixed_cg_regs, _shift,
> > &mtk_clk_gate_ops_no_setclr_inv)
> > +
> > +static const struct mtk_gate apmixed_clks[] = {
> > +	GATE_APMIXED(CLK_APMIXED_PLL_SSUSB26M_EN, "pll_ssusb26m_en",
> > "clk26m", 1),
> > +};
> > +
> > +#define MT8188_PLL_FMAX		(3800UL * MHZ)
> > +#define MT8188_PLL_FMIN		(1500UL * MHZ)
> > +#define MT8188_INTEGER_BITS	8
> > +
> > +#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags,		
> > \
> > +	    _rst_bar_mask, _pcwbits, _pd_reg, _pd_shift,		\
> > +	    _tuner_reg, _tuner_en_reg, _tuner_en_bit,			
> > \
> > +	    _pcw_reg, _pcw_shift, _pcw_chg_reg,				
> > \
> > +	    _en_reg, _pll_en_bit) {					\
> > +		.id = _id,						\
> > +		.name = _name,						
> > \
> > +		.reg = _reg,						
> > \
> > +		.pwr_reg = _pwr_reg,					
> > \
> > +		.en_mask = _en_mask,					
> > \
> > +		.flags = _flags,					\
> > +		.rst_bar_mask = _rst_bar_mask,				
> > \
> > +		.fmax = MT8188_PLL_FMAX,				\
> > +		.fmin = MT8188_PLL_FMIN,				\
> > +		.pcwbits = _pcwbits,					
> > \
> > +		.pcwibits = MT8188_INTEGER_BITS,			\
> > +		.pd_reg = _pd_reg,					\
> > +		.pd_shift = _pd_shift,					
> > \
> > +		.tuner_reg = _tuner_reg,				\
> > +		.tuner_en_reg = _tuner_en_reg,				
> > \
> > +		.tuner_en_bit = _tuner_en_bit,				
> > \
> > +		.pcw_reg = _pcw_reg,					
> > \
> > +		.pcw_shift = _pcw_shift,				\
> > +		.pcw_chg_reg = _pcw_chg_reg,				
> > \
> > +		.en_reg = _en_reg,					\
> > +		.pll_en_bit = _pll_en_bit,				\
> > +	}
> > +
> > +static const struct mtk_pll_data plls[] = {
> > +	PLL(CLK_APMIXED_ETHPLL, "ethpll", 0x044C, 0x0458, 0,
> > +	    0, 0, 22, 0x0450, 24, 0, 0, 0, 0x0450, 0, 0, 0, 9),
> > +	PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x0514, 0x0520, 0,
> > +	    0, 0, 22, 0x0518, 24, 0, 0, 0, 0x0518, 0, 0, 0, 9),
> > +	PLL(CLK_APMIXED_TVDPLL1, "tvdpll1", 0x0524, 0x0530, 0,
> > +	    0, 0, 22, 0x0528, 24, 0, 0, 0, 0x0528, 0, 0, 0, 9),
> > +	PLL(CLK_APMIXED_TVDPLL2, "tvdpll2", 0x0534, 0x0540, 0,
> > +	    0, 0, 22, 0x0538, 24, 0, 0, 0, 0x0538, 0, 0, 0, 9),
> > +	PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0544, 0x0550, 0xff000000,
> > +	    HAVE_RST_BAR, BIT(23), 22, 0x0548, 24, 0, 0, 0, 0x0548, 0,
> > 0, 0, 9),
> > +	PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x045C, 0x0468, 0xff000000,
> > +	    HAVE_RST_BAR, BIT(23), 22, 0x0460, 24, 0, 0, 0, 0x0460, 0,
> > 0, 0, 9),
> > +	PLL(CLK_APMIXED_IMGPLL, "imgpll", 0x0554, 0x0560, 0,
> > +	    0, 0, 22, 0x0558, 24, 0, 0, 0, 0x0558, 0, 0, 0, 9),
> > +	PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x0504, 0x0510, 0xff000000,
> > +	    HAVE_RST_BAR, BIT(23), 22, 0x0508, 24, 0, 0, 0, 0x0508, 0,
> > 0, 0, 9),
> > +	PLL(CLK_APMIXED_ADSPPLL, "adsppll", 0x042C, 0x0438, 0,
> > +	    0, 0, 22, 0x0430, 24, 0, 0, 0, 0x0430, 0, 0, 0, 9),
> > +	PLL(CLK_APMIXED_APLL1, "apll1", 0x0304, 0x0314, 0,
> > +	    0, 0, 32, 0x0308, 24, 0x0034, 0x0000, 12, 0x030C, 0, 0, 0,
> > 9),
> > +	PLL(CLK_APMIXED_APLL2, "apll2", 0x0318, 0x0328, 0,
> > +	    0, 0, 32, 0x031C, 24, 0x0038, 0x0000, 13, 0x0320, 0, 0, 0,
> > 9),
> > +	PLL(CLK_APMIXED_APLL3, "apll3", 0x032C, 0x033C, 0,
> > +	    0, 0, 32, 0x0330, 24, 0x003C, 0x0000, 14, 0x0334, 0, 0, 0,
> > 9),
> > +	PLL(CLK_APMIXED_APLL4, "apll4", 0x0404, 0x0414, 0,
> > +	    0, 0, 32, 0x0408, 24, 0x0040, 0x0000, 15, 0x040C, 0, 0, 0,
> > 9),
> > +	PLL(CLK_APMIXED_APLL5, "apll5", 0x0418, 0x0428, 0,
> > +	    0, 0, 32, 0x041C, 24, 0x0044, 0x0000, 16, 0x0420, 0, 0, 0,
> > 9),
> > +	PLL(CLK_APMIXED_MFGPLL, "mfgpll", 0x0340, 0x034C, 0,
> > +	    0, 0, 22, 0x0344, 24, 0, 0, 0, 0x0344, 0, 0, 0, 9),
> > +};
> > +
> > +static const struct of_device_id of_match_clk_mt8188_apmixed[] = {
> > +	{ .compatible = "mediatek,mt8188-apmixedsys", },
> 
> You don't need the comma after compatible
> 
> 	{ .compatible = "mediatek,mt8188-apmixedsys" },
> 
> > +	{}
> 
> At the end, please say what the last entry is; a common way to do
> this is:
> 
> 	{ /* sentinel */ }
> 
> ...since that's a sentinel! :-)
> Ok.
> > +};
> 
> You miss just one little step for module auto-loading here.
> 
> MODULE_DEVICE_TABLE(of, of_match_clk_mt8188_apmixed);
  Ok.
> 
> > +
> > +static int clk_mt8188_apmixed_probe(struct platform_device *pdev)
> > +{
> > +	struct clk_hw_onecell_data *clk_data;
> > +	struct device_node *node = pdev->dev.of_node;
> > +	int r;
> > +
> > +	clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
> > +	if (!clk_data)
> > +		return -ENOMEM;
> > +
> > +	r = mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
> > clk_data);
> > +	if (r)
> > +		goto free_apmixed_data;
> > +
> > +	r = mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
> > +				   ARRAY_SIZE(apmixed_clks), clk_data);
> > +	if (r)
> > +		goto unregister_plls;
> > +
> > +	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
> > clk_data);
> > +	if (r)
> > +		goto unregister_gates;
> > +
> > +	platform_set_drvdata(pdev, clk_data);
> > +
> > +	return r;
> 
> Reaching this point means that no error occurred, so here...
> 
> 	return 0;
> 
OK.
> > +
> > +unregister_gates:
> > +	mtk_clk_unregister_gates(apmixed_clks,
> > ARRAY_SIZE(apmixed_clks), clk_data);
> > +unregister_plls:
> > +	mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
> > +free_apmixed_data:
> > +	mtk_free_clk_data(clk_data);
> > +	return r;
> > +}
> > +
> > +static int clk_mt8188_apmixed_remove(struct platform_device *pdev)
> > +{
> > +	struct device_node *node = pdev->dev.of_node;
> > +	struct clk_hw_onecell_data *clk_data =
> > platform_get_drvdata(pdev);
> > +
> > +	of_clk_del_provider(node);
> > +	mtk_clk_unregister_gates(apmixed_clks,
> > ARRAY_SIZE(apmixed_clks), clk_data);
> > +	mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
> > +	mtk_free_clk_data(clk_data);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct platform_driver clk_mt8188_apmixed_drv = {
> > +	.probe = clk_mt8188_apmixed_probe,
> > +	.remove = clk_mt8188_apmixed_remove,
> > +	.driver = {
> > +		.name = "clk-mt8188-apmixed",
> > +		.of_match_table = of_match_clk_mt8188_apmixed,
> > +	},
> > +};
> > +builtin_platform_driver(clk_mt8188_apmixed_drv);
> 
> You can change builtin_platform_driver() to module_platform_driver()
> here to
> achieve modularity.
OK.
> 
> Regards,
> Angelo
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux