[PATCH v3 4/5] arm64: dts: qcom: sm8150: Add GPU speedbin support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SM8150 has (at least) two GPU speed bins. With the support added on the
driver side, wire up bin detection in the DTS to restrict lower-quality
SKUs from running at frequencies they were not validated at.

Tested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> # On Sony Xperia 5 (speed bin 0x3)
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 880483922f22..e4230877555d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -952,6 +952,17 @@ ethernet: ethernet@20000 {
 			status = "disabled";
 		};
 
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8150-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
+		};
 
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
@@ -2169,44 +2180,52 @@ gpu: gpu@2c00000 {
 
 			qcom,gmu = <&gmu>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			status = "disabled";
 
 			zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
-			/* note: downstream checks gpu binning for 675 Mhz */
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-675000000 {
 					opp-hz = /bits/ 64 <675000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0x2>;
 				};
 
 				opp-585000000 {
 					opp-hz = /bits/ 64 <585000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-499200000 {
 					opp-hz = /bits/ 64 <499200000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-427000000 {
 					opp-hz = /bits/ 64 <427000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-345000000 {
 					opp-hz = /bits/ 64 <345000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0x3>;
 				};
 
 				opp-257000000 {
 					opp-hz = /bits/ 64 <257000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0x3>;
 				};
 			};
 		};

-- 
2.40.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux