Re: [PATCH v4 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 28, 2023 at 09:09:09AM +0200, Krzysztof Kozlowski wrote:
> On 27/03/2023 11:30, Varadarajan Narayanan wrote:
> > Add USB phy and controller related nodes
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > ---
> >  Changes in v4:
> > 	- Use newer bindings without subnodes
> > 	- Fix coding style issues
> >
> >  Changes in v3:
> > 	- Insert the nodes at proper location
> >
> >  Changes in v2:
> > 	- Fixed issues flagged by Krzysztof
> > 	- Fix issues reported by make dtbs_check
> > 	- Remove NOC related clocks (to be added with proper
> > 	  interconnect support)
> > ---
> >  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 83 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 83 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > index 2bb4053..5379c25 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > @@ -215,6 +215,45 @@
> >  		#size-cells = <1>;
> >  		ranges = <0 0 0 0xffffffff>;
> >
> > +		qusb_phy_0: phy@7b000 {
> > +			compatible = "qcom,ipq9574-qusb2-phy";
> > +			reg = <0x0007b000 0x180>;
> > +			#phy-cells = <0>;
> > +
> > +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > +				 <&xo_board_clk>;
> > +			clock-names = "cfg_ahb",
> > +				      "ref";
> > +
> > +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> > +			status = "disabled";
> > +		};
> > +
> > +		ssphy_0: phy@7d000 {
> > +			compatible = "qcom,ipq9574-qmp-usb3-phy";
> > +			reg = <0x0007d000 0xa00>;
> > +			#clock-cells = <1>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +			ranges;
>
> Why do you need these three?

Don't need these. Have moved to qcom,sc8280xp-qmp-usb3-uni-phy.yaml
specification instead of qcom,msm8996-qmp-usb3-phy.yaml. Will
update accordingly and post.

> > +
> > +			clocks = <&gcc GCC_USB0_AUX_CLK>,
> > +				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > +				 <&gcc GCC_USB0_PIPE_CLK>;
> > +			clock-names = "aux",
> > +				      "cfg_ahb",
> > +				      "pipe";
> > +
> > +			resets = <&gcc GCC_USB0_PHY_BCR>,
> > +				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> > +			reset-names = "phy",
> > +				      "common";
> > +			status = "disabled";
> > +
> > +			#phy-cells = <0>;
> > +			clock-output-names = "usb0_pipe_clk";
>
> Does not look like you tested the DTS against bindings. Please run `make
> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> for instructions).

Have addressed these and have created a new patch. Will post it
shortly. IPQ9574 doesn't have any power domains, hence don't have
power-domains entry in the DT node. make dtbs_check is giving the
following messages hope that is ok

	/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

	/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

>
> > +		};
> > +
> >  		pcie0_phy: phy@84000 {
> >  			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
> >  			reg = <0x00084000 0x1bc>; /* Serdes PLL */
> > @@ -436,6 +475,50 @@
> >  			status = "disabled";
> >  		};
> >
> > +		usb3: usb3@8a00000 {
>
> usb@

Will fix.

> > +			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> > +			reg = <0x08af8800 0x400>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +			ranges;
>
>
>
> > +
> > +			clocks = <&gcc GCC_SNOC_USB_CLK>,
> > +				 <&gcc GCC_ANOC_USB_AXI_CLK>,
> > +				 <&gcc GCC_USB0_MASTER_CLK>,
> > +				 <&gcc GCC_USB0_SLEEP_CLK>,
> > +				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +
> > +			clock-names = "sys_noc_axi",
> > +				      "anoc_axi",
> > +				      "master",
> > +				      "sleep",
> > +				      "mock_utmi";
> > +
> > +			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> > +					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +			assigned-clock-rates = <200000000>,
> > +					       <24000000>;
> > +
> > +			resets = <&gcc GCC_USB_BCR>;
> > +			status = "disabled";
> > +
> > +			dwc_0: usb@8a00000 {
> > +				compatible = "snps,dwc3";
> > +				reg = <0x8a00000 0xcd00>;
> > +				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > +				clock-names = "ref";
> > +				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> > +				phys = <&qusb_phy_0>, <&ssphy_0>;
> > +				phy-names = "usb2-phy", "usb3-phy";
> > +				tx-fifo-resize;
> > +				snps,is-utmi-l1-suspend;
> > +				snps,hird-threshold = /bits/ 8 <0x0>;
> > +				snps,dis_u2_susphy_quirk;
> > +				snps,dis_u3_susphy_quirk;
> > +				dr_mode = "host";
>
> Are you saying that peripheral mode cannot work on this USB controller?
> Never?

Will move to board DTS.

Thanks
Varada

> Best regards,
> Krzysztof
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux