Hi, On Wed, Mar 29, 2023 at 8:16 AM Vinod Polimera <vpolimer@xxxxxxxxxxxxxxxx> wrote: > > > > > -----Original Message----- > > From: Stephen Boyd <swboyd@xxxxxxxxxxxx> > > Sent: Monday, March 27, 2023 9:58 PM > > To: Bjorn Andersson <andersson@xxxxxxxxxx>; Vinod Polimera (QUIC) > > <quic_vpolimer@xxxxxxxxxxx> > > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; > > freedreno@xxxxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > > kernel@xxxxxxxxxxxxxxx; robdclark@xxxxxxxxx; dianders@xxxxxxxxxxxx; > > Kalyan Thota (QUIC) <quic_kalyant@xxxxxxxxxxx>; > > dmitry.baryshkov@xxxxxxxxxx; Kuogee Hsieh (QUIC) > > <quic_khsieh@xxxxxxxxxxx>; Vishnuvardhan Prodduturi (QUIC) > > <quic_vproddut@xxxxxxxxxxx>; Bjorn Andersson (QUIC) > > <quic_bjorande@xxxxxxxxxxx>; Abhinav Kumar (QUIC) > > <quic_abhinavk@xxxxxxxxxxx>; Sankeerth Billakanti (QUIC) > > <quic_sbillaka@xxxxxxxxxxx> > > Subject: Re: [PATCH v14 14/14] drm/msm/dp: set self refresh aware based > > on PSR support > > > > Quoting Bjorn Andersson (2023-03-26 09:35:56) > > > On Sun, Mar 26, 2023 at 09:27:23AM -0700, Bjorn Andersson wrote: > > > > On Thu, Mar 02, 2023 at 10:03:17PM +0530, Vinod Polimera wrote: > > > > > For the PSR to kick in, self_refresh_aware has to be set. > > > > > Initialize it based on the PSR support for the eDP interface. > > > > > > > > > > > > > When I boot my sc8280xp devices (CRD and X13s) to console with this > > > > patch included I get a login prompt, and then there are no more screen > > > > updates. > > > > > > > > Switching virtual terminal (ctrl+alt+fN) causes the screen to redraw. > > > > > > > > Blindly login in and launching Wayland works and from then on screen > > > > updates works as expected. > > > > > > > > Switching from Wayland to another virtual terminal causes the problem > > to > > > > re-appear, no updates after the initial refresh, switching back go the > > > > Wayland-terminal crashed the machine. > > > > > > > > > > Also, trying to bring the eDP-screen back from DPMS gives me: > > > > > > <3>[ 2355.218099] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] > > *ERROR* set state_bit for link_train=1 failed > > > <3>[ 2355.218926] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link > > training #1 failed. ret=-110 > > > <3>[ 2355.262859] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] > > *ERROR* set state_bit for link_train=1 failed > > > <3>[ 2355.263600] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link > > training #1 failed. ret=-110 > > > <3>[ 2355.305211] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] > > *ERROR* set state_bit for link_train=1 failed > > > <3>[ 2355.305955] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link > > training #1 failed. ret=-110 > > > <3>[ 2355.345250] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] > > *ERROR* set state_bit for link_train=1 failed > > > <3>[ 2355.346026] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link > > training #1 failed. ret=-110 > > > <3>[ 2355.405650] [drm:dp_display_process_hpd_high [msm]] *ERROR* > > failed to complete DP link training > > > <3>[ 2355.668988] > > [drm:dpu_encoder_phys_vid_wait_for_commit_done:488] [dpu > > error]vblank timeout > > > <3>[ 2355.669030] [drm:dpu_kms_wait_for_commit_done:510] [dpu > > error]wait for commit done returned -110 > > > <3>[ 2355.699989] [drm:dpu_encoder_frame_done_timeout:2398] [dpu > > error]enc35 frame done timeout > > > > > > And then the machine just resets. > > > > > > > I saw similar behavior on ChromeOS after we picked the PSR patches into > > our kernel. I suspect it's the same problem. I switched back and forth > > between VT2 and the OOBE screen with ctrl+alt+forward and that showed > > what I typed on the virtual terminal after switching back and forth. > > It's like the redraw only happens once on the switch and never again. I > > switched back and forth enough times that it eventually crashed the > > kernel and rebooted. This was on CRD (sc7280-herobrine-crd.dts). > > > > There's an animation on the OOBE screen that is working though, so > > perhaps PSR is working with the chrome compositor but not the virtual > > terminal? I haven't investigated. > > I was able to reproduce the issue where in virtual terminal, I don't see any screen refresh despite typing in. > In the VT mode, I see that PSR is entered, but despite typing in there are no atomic commits triggered, hence the last buffer was always refreshed. > > Queries from my side to Rob & Doug: > 1) In VT mode, does the framework operates in single buffer mode without any commit for new updates ? > 2) if above is true then, how does driver know if the framework operates in single buffer mode, to make any appropriate action > 3) what is the expected behavior with the driver here ? should it return atomic_check failure, for single buffer mode operation or, it should exit PSR ? > 4) is there any HINT passed down to the driver so that we can bank on it and act accordingly? I haven't looked at this detail about PSR before, and I left my PSR-enabled device at home so I can't easily test this right now. That being said, from a bit of searching I would guess that msm_framebuffer_dirtyfb() is somehow involved here. Are things better if you get rid of the test against 'msm_fb->dirtyfb'? I at least used ftrace to confirm that on a different device msm_framebuffer_dirtyfb() is not called during normal ChromeOS usage but it _is_ called in VT2 usage. -Doug
