This patch adds a new driver for Richtek RT5033 driver.
RT5033 is a Multifunction device which includes battery charger, fuel gauge,
flash LED current source, LDO and synchronous Buck converter. It is interfaced
to host controller using I2C interface.
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Cc: Lee Jones <lee.jone@xxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
Changes in v6
- Fix white space issue in mfd cell struct.
Changes in v5
- Change possible built as a module.
- Revise rt5033_dev mfd cell entry.
- Fix incorrect typo.
- Add module alias.
Changes in v4
- none.
Changes in v3
- Correct sentence errors.
- Add author information the top of each drivers.
- Remove unnecessary pre-initialise, struct member(rt5033->i2c) and blink.
- Change some return check.
- Use bool and of_match_ptr().
Changes in v2
- Remove volatile_reg callback. Because this driver not in use regmap cache.
- Revmoe unnecessary subnode of_compatible.
- Add define for set_high impedance mode of charger.
drivers/mfd/Kconfig | 12 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/rt5033.c | 141 +++++++++++++++++++
include/linux/mfd/rt5033-private.h | 260 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/rt5033.h | 62 +++++++++
5 files changed, 476 insertions(+)
create mode 100644 drivers/mfd/rt5033.c
create mode 100644 include/linux/mfd/rt5033-private.h
create mode 100644 include/linux/mfd/rt5033.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 72d3808..9c13170 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -618,6 +618,18 @@ config MFD_RTSX_PCI
types of memory cards, such as Memory Stick, Memory Stick Pro,
Secure Digital and MultiMediaCard.
+config MFD_RT5033
+ tristate "Richtek RT5033 Power Management IC"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ This driver provides for the Richtek RT5033 Power Management IC,
+ which includes the I2C driver and the Core APIs. This driver provides
+ common support for accessing the device. The device supports multiple
+ sub-devices like charger, fuel gauge, flash LED, current source,
+ LDO and Buck.
+
config MFD_RTSX_USB
tristate "Realtek USB card reader"
depends on USB
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e2..4059c24 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -176,6 +176,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
+obj-$(CONFIG_MFD_RT5033) += rt5033.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c
new file mode 100644
index 0000000..e2877c0
--- /dev/null
+++ b/drivers/mfd/rt5033.c
@@ -0,0 +1,141 @@
+/*
+ * MFD core driver for the Richtek RT5033.
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/of_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+
+static const struct regmap_irq rt5033_irqs[] = {
+ { .mask = RT5033_PMIC_IRQ_BUCKOCP, },
+ { .mask = RT5033_PMIC_IRQ_BUCKLV, },
+ { .mask = RT5033_PMIC_IRQ_SAFELDOLV, },
+ { .mask = RT5033_PMIC_IRQ_LDOLV, },
+ { .mask = RT5033_PMIC_IRQ_OT, },
+ { .mask = RT5033_PMIC_IRQ_VDDA_UV, },
+};
+
+static const struct regmap_irq_chip rt5033_irq_chip = {
+ .name = "rt5033",
+ .status_base = RT5033_REG_PMIC_IRQ_STAT,
+ .mask_base = RT5033_REG_PMIC_IRQ_CTRL,
+ .mask_invert = true,
+ .num_regs = 1,
+ .irqs = rt5033_irqs,
+ .num_irqs = ARRAY_SIZE(rt5033_irqs),
+};
+
+static const struct mfd_cell rt5033_devs[] = {
+ { .name = "rt5033-regulator", },
+ {
+ .name = "rt5033-charger",
+ .of_compatible = "richtek,rt5033-charger",
+ }, {
+ .name = "rt5033-battery",
+ .of_compatible = "richtek,rt5033-battery",
+ },
+};
+
+static const struct of_device_id rt5033_dt_match[] = {
+ { .compatible = "richtek,rt5033", },
+ { }
+};
+
+static const struct regmap_config rt5033_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RT5033_REG_END,
+};
+
+static int rt5033_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct rt5033_dev *rt5033;
+ unsigned int data;
+ int ret;
+
+ rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL);
+ if (!rt5033)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, rt5033);
+ rt5033->dev = &i2c->dev;
+ rt5033->irq = i2c->irq;
+ rt5033->wakeup = true;
+
+ rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config);
+ if (IS_ERR(rt5033->regmap)) {
+ dev_err(&i2c->dev, "Failed to allocate register map.\n");
+ return PTR_ERR(rt5033->regmap);
+ }
+
+ ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &data);
+ if (ret) {
+ dev_err(&i2c->dev, "Device not found\n");
+ return -ENODEV;
+ }
+ dev_info(&i2c->dev, "Device found Device ID: %04x\n", data);
+
+ ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ 0, &rt5033_irq_chip, &rt5033->irq_data);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
+ rt5033->irq, ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(rt5033->dev, -1, rt5033_devs,
+ ARRAY_SIZE(rt5033_devs), NULL, 0,
+ regmap_irq_get_domain(rt5033->irq_data));
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to add RT5033 child devices.\n");
+ return ret;
+ }
+
+ device_init_wakeup(rt5033->dev, rt5033->wakeup);
+
+ return 0;
+}
+
+static int rt5033_i2c_remove(struct i2c_client *i2c)
+{
+ struct rt5033_dev *rt5033 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(rt5033->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id rt5033_i2c_id[] = {
+ { "rt5033", },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id);
+
+static struct i2c_driver rt5033_driver = {
+ .driver = {
+ .name = "rt5033",
+ .of_match_table = of_match_ptr(rt5033_dt_match),
+ },
+ .probe = rt5033_i2c_probe,
+ .remove = rt5033_i2c_remove,
+ .id_table = rt5033_i2c_id,
+};
+module_i2c_driver(rt5033_driver);
+
+MODULE_ALIAS("i2c:rt5033");
+MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
new file mode 100644
index 0000000..1b63fc2
--- /dev/null
+++ b/include/linux/mfd/rt5033-private.h
@@ -0,0 +1,260 @@
+/*
+ * MFD core driver for Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#ifndef __RT5033_PRIVATE_H__
+#define __RT5033_PRIVATE_H__
+
+enum rt5033_reg {
+ RT5033_REG_CHG_STAT = 0x00,
+ RT5033_REG_CHG_CTRL1 = 0x01,
+ RT5033_REG_CHG_CTRL2 = 0x02,
+ RT5033_REG_DEVICE_ID = 0x03,
+ RT5033_REG_CHG_CTRL3 = 0x04,
+ RT5033_REG_CHG_CTRL4 = 0x05,
+ RT5033_REG_CHG_CTRL5 = 0x06,
+ RT5033_REG_RT_CTRL0 = 0x07,
+ RT5033_REG_CHG_RESET = 0x08,
+ /* Reserved 0x09~0x18 */
+ RT5033_REG_RT_CTRL1 = 0x19,
+ /* Reserved 0x1A~0x20 */
+ RT5033_REG_FLED_FUNCTION1 = 0x21,
+ RT5033_REG_FLED_FUNCTION2 = 0x22,
+ RT5033_REG_FLED_STROBE_CTRL1 = 0x23,
+ RT5033_REG_FLED_STROBE_CTRL2 = 0x24,
+ RT5033_REG_FLED_CTRL1 = 0x25,
+ RT5033_REG_FLED_CTRL2 = 0x26,
+ RT5033_REG_FLED_CTRL3 = 0x27,
+ RT5033_REG_FLED_CTRL4 = 0x28,
+ RT5033_REG_FLED_CTRL5 = 0x29,
+ /* Reserved 0x2A~0x40 */
+ RT5033_REG_CTRL = 0x41,
+ RT5033_REG_BUCK_CTRL = 0x42,
+ RT5033_REG_LDO_CTRL = 0x43,
+ /* Reserved 0x44~0x46 */
+ RT5033_REG_MANUAL_RESET_CTRL = 0x47,
+ /* Reserved 0x48~0x5F */
+ RT5033_REG_CHG_IRQ1 = 0x60,
+ RT5033_REG_CHG_IRQ2 = 0x61,
+ RT5033_REG_CHG_IRQ3 = 0x62,
+ RT5033_REG_CHG_IRQ1_CTRL = 0x63,
+ RT5033_REG_CHG_IRQ2_CTRL = 0x64,
+ RT5033_REG_CHG_IRQ3_CTRL = 0x65,
+ RT5033_REG_LED_IRQ_STAT = 0x66,
+ RT5033_REG_LED_IRQ_CTRL = 0x67,
+ RT5033_REG_PMIC_IRQ_STAT = 0x68,
+ RT5033_REG_PMIC_IRQ_CTRL = 0x69,
+ RT5033_REG_SHDN_CTRL = 0x6A,
+ RT5033_REG_OFF_EVENT = 0x6B,
+
+ RT5033_REG_END,
+};
+
+/* RT5033 Charger state register */
+#define RT5033_CHG_STAT_MASK 0x20
+#define RT5033_CHG_STAT_DISCHARGING 0x00
+#define RT5033_CHG_STAT_FULL 0x10
+#define RT5033_CHG_STAT_CHARGING 0x20
+#define RT5033_CHG_STAT_NOT_CHARGING 0x30
+#define RT5033_CHG_STAT_TYPE_MASK 0x60
+#define RT5033_CHG_STAT_TYPE_PRE 0x20
+#define RT5033_CHG_STAT_TYPE_FAST 0x60
+
+/* RT5033 CHGCTRL1 register */
+#define RT5033_CHGCTRL1_IAICR_MASK 0xe0
+#define RT5033_CHGCTRL1_MODE_MASK 0x01
+
+/* RT5033 CHGCTRL2 register */
+#define RT5033_CHGCTRL2_CV_MASK 0xfc
+
+/* RT5033 CHGCTRL3 register */
+#define RT5033_CHGCTRL3_CFO_EN_MASK 0x40
+#define RT5033_CHGCTRL3_TIMER_MASK 0x38
+#define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01
+
+/* RT5033 CHGCTRL4 register */
+#define RT5033_CHGCTRL4_EOC_MASK 0x07
+#define RT5033_CHGCTRL4_IPREC_MASK 0x18
+
+/* RT5033 CHGCTRL5 register */
+#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
+#define RT5033_CHGCTRL5_ICHG_MASK 0xf0
+#define RT5033_CHGCTRL5_ICHG_SHIFT 0x04
+#define RT5033_CHG_MAX_CURRENT 0x0d
+
+/* RT5033 RT CTRL1 register */
+#define RT5033_RT_CTRL1_UUG_MASK 0x02
+#define RT5033_RT_HZ_MASK 0x01
+
+/* RT5033 control register */
+#define RT5033_CTRL_FCCM_BUCK_MASK 0x00
+#define RT5033_CTRL_BUCKOMS_MASK 0x01
+#define RT5033_CTRL_LDOOMS_MASK 0x02
+#define RT5033_CTRL_SLDOOMS_MASK 0x03
+#define RT5033_CTRL_EN_BUCK_MASK 0x04
+#define RT5033_CTRL_EN_LDO_MASK 0x05
+#define RT5033_CTRL_EN_SAFE_LDO_MASK 0x06
+#define RT5033_CTRL_LDO_SLEEP_MASK 0x07
+
+/* RT5033 BUCK control register */
+#define RT5033_BUCK_CTRL_MASK 0x1f
+
+/* RT5033 LDO control register */
+#define RT5033_LDO_CTRL_MASK 0x1f
+
+/* RT5033 charger property - model, manufacturer */
+
+#define RT5033_CHARGER_MODEL "RT5033WSC Charger"
+#define RT5033_MANUFACTURER "Richtek Technology Corporation"
+
+/*
+ * RT5033 charger fast-charge current lmits (as in CHGCTRL1 register),
+ * AICR mode limits the input current for example,
+ * the AIRC 100 mode limits the input current to 100 mA.
+ */
+#define RT5033_AICR_100_MODE 0x20
+#define RT5033_AICR_500_MODE 0x40
+#define RT5033_AICR_700_MODE 0x60
+#define RT5033_AICR_900_MODE 0x80
+#define RT5033_AICR_1500_MODE 0xc0
+#define RT5033_AICR_2000_MODE 0xe0
+#define RT5033_AICR_MODE_MASK 0xe0
+
+/* RT5033 use internal timer need to set time */
+#define RT5033_FAST_CHARGE_TIMER4 0x00
+#define RT5033_FAST_CHARGE_TIMER6 0x01
+#define RT5033_FAST_CHARGE_TIMER8 0x02
+#define RT5033_FAST_CHARGE_TIMER9 0x03
+#define RT5033_FAST_CHARGE_TIMER12 0x04
+#define RT5033_FAST_CHARGE_TIMER14 0x05
+#define RT5033_FAST_CHARGE_TIMER16 0x06
+
+#define RT5033_INT_TIMER_ENABLE 0x01
+
+/* RT5033 charger termination enable mask */
+#define RT5033_TE_ENABLE_MASK 0x08
+
+/*
+ * RT5033 charger opa mode. RT50300 have two opa mode charger mode
+ * and boost mode for OTG
+ */
+
+#define RT5033_CHARGER_MODE 0x00
+#define RT5033_BOOST_MODE 0x01
+
+/* RT5033 charger termination enable */
+#define RT5033_TE_ENABLE 0x08
+
+/* RT5033 charger CFO enable */
+#define RT5033_CFO_ENABLE 0x40
+
+/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
+#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U
+#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U
+#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U
+
+/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
+#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U
+#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U
+#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U
+
+/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
+#define RT5033_CHARGER_FAST_CURRENT_MIN 700000U
+#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U
+#define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U
+
+/*
+ * RT5033 charger const-charge end of charger current (
+ * as in CHGCTRL4 register), uA
+ */
+#define RT5033_CHARGER_EOC_MIN 150000U
+#define RT5033_CHARGER_EOC_REF 300000U
+#define RT5033_CHARGER_EOC_STEP_NUM1 50000U
+#define RT5033_CHARGER_EOC_STEP_NUM2 100000U
+#define RT5033_CHARGER_EOC_MAX 600000U
+
+/*
+ * RT5033 charger pre-charge threshold volt limits
+ * (as in CHGCTRL5 register), uV
+ */
+
+#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN 2300000U
+#define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM 100000U
+#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX 3800000U
+
+/*
+ * RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger
+ * circuit.
+ */
+#define RT5033_CHARGER_UUG_ENABLE 0x02
+
+/* RT5033 charger High impedance mode */
+#define RT5033_CHARGER_HZ_DISABLE 0x00
+#define RT5033_CHARGER_HZ_ENABLE 0x01
+
+/* RT5033 regulator BUCK output voltage uV */
+#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN 1000000U
+#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX 3000000U
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP 100000U
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 32
+
+/* RT5033 regulator LDO output voltage uV */
+#define RT5033_REGULATOR_LDO_VOLTAGE_MIN 1200000U
+#define RT5033_REGULATOR_LDO_VOLTAGE_MAX 3000000U
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP 100000U
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 32
+
+/* RT5033 regulator SAFE LDO output voltage uV */
+#define RT5033_REGULATOR_SAFE_LDO_VOLTAGE 4900000U
+
+enum rt5033_fuel_reg {
+ RT5033_FUEL_REG_OCV_H = 0x00,
+ RT5033_FUEL_REG_OCV_L = 0x01,
+ RT5033_FUEL_REG_VBAT_H = 0x02,
+ RT5033_FUEL_REG_VBAT_L = 0x03,
+ RT5033_FUEL_REG_SOC_H = 0x04,
+ RT5033_FUEL_REG_SOC_L = 0x05,
+ RT5033_FUEL_REG_CTRL_H = 0x06,
+ RT5033_FUEL_REG_CTRL_L = 0x07,
+ RT5033_FUEL_REG_CRATE = 0x08,
+ RT5033_FUEL_REG_DEVICE_ID = 0x09,
+ RT5033_FUEL_REG_AVG_VOLT_H = 0x0A,
+ RT5033_FUEL_REG_AVG_VOLT_L = 0x0B,
+ RT5033_FUEL_REG_CONFIG_H = 0x0C,
+ RT5033_FUEL_REG_CONFIG_L = 0x0D,
+ /* Reserved 0x0E~0x0F */
+ RT5033_FUEL_REG_IRQ_CTRL = 0x10,
+ RT5033_FUEL_REG_IRQ_FLAG = 0x11,
+ RT5033_FUEL_VMIN = 0x12,
+ RT5033_FUEL_SMIN = 0x13,
+ /* Reserved 0x14~0x1F */
+ RT5033_FUEL_VGCOMP1 = 0x20,
+ RT5033_FUEL_VGCOMP2 = 0x21,
+ RT5033_FUEL_VGCOMP3 = 0x22,
+ RT5033_FUEL_VGCOMP4 = 0x23,
+ /* Reserved 0x24~0xFD */
+ RT5033_FUEL_MFA_H = 0xFE,
+ RT5033_FUEL_MFA_L = 0xFF,
+
+ RT5033_FUEL_REG_END,
+};
+
+/* RT5033 fuel gauge battery present property */
+#define RT5033_FUEL_BAT_PRESENT 0x02
+
+/* RT5033 PMIC interrupts */
+#define RT5033_PMIC_IRQ_BUCKOCP 2
+#define RT5033_PMIC_IRQ_BUCKLV 3
+#define RT5033_PMIC_IRQ_SAFELDOLV 4
+#define RT5033_PMIC_IRQ_LDOLV 5
+#define RT5033_PMIC_IRQ_OT 6
+#define RT5033_PMIC_IRQ_VDDA_UV 7
+
+#endif /* __RT5033_PRIVATE_H__ */
diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
new file mode 100644
index 0000000..bd06415
--- /dev/null
+++ b/include/linux/mfd/rt5033.h
@@ -0,0 +1,62 @@
+/*
+ * MFD core driver for the RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics
+ * Author: Beomho Seo <beomho.seo@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#ifndef __RT5033_H__
+#define __RT5033_H__
+
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+/* RT5033 regulator IDs */
+enum rt5033_regulators {
+ RT5033_BUCK = 0,
+ RT5033_LDO,
+ RT5033_SAFE_LDO,
+
+ RT5033_REGULATOR_NUM,
+};
+
+struct rt5033_dev {
+ struct device *dev;
+
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *irq_data;
+ int irq;
+ bool wakeup;
+};
+
+struct rt5033_battery {
+ struct i2c_client *client;
+ struct rt5033_dev *rt5033;
+ struct regmap *regmap;
+ struct power_supply psy;
+};
+
+/* RT5033 charger platform data */
+struct rt5033_charger_data {
+ unsigned int pre_uamp;
+ unsigned int pre_uvolt;
+ unsigned int const_uvolt;
+ unsigned int eoc_uamp;
+ unsigned int fast_uamp;
+};
+
+struct rt5033_charger {
+ struct device *dev;
+ struct rt5033_dev *rt5033;
+ struct power_supply psy;
+
+ struct rt5033_charger_data *data;
+};
+
+#endif /* __RT5033_H__ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
