Re: [PATCH 2/2] arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12:07-20230329, Apurva Nandan wrote:
> From: Suman Anna <s-anna@xxxxxx>
> 
> J7200 SoCs has a R5F cluster in each of the MAIN and MCU domains, and both
> of these are configured for LockStep mode at the moment. Switch the MAIN
> R5F cluster to Split mode by default to maximize the number of R5F cores.
> The MCU R5F cluster continues to be in the preferred LockStep mode.
> 
> Note that this configuration is the default for remoteproc mode (kernel
> driver boots the R5F processors). These will be overridden for early-booted
> remoteprocs through the corresponding IPC-only support in the K3 R5F
> remoteproc driver.

Same comment as #1.

> 
> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> index 138381f43ce4..573a7f949b1d 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> @@ -797,7 +797,7 @@ watchdog1: watchdog@2210000 {
>  
>  	main_r5fss0: r5fss@5c00000 {
>  		compatible = "ti,j7200-r5fss";
> -		ti,cluster-mode = <1>;
> +		ti,cluster-mode = <0>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux