Hi Rob, Guenter, I need your inputs & direction on the next step for max6639 driver. I'm willing to work & implement changes. Thank you for your time and consideration. Regards, Naresh Solanki Regards, Naresh Solanki 9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany Email: naresh.solanki@xxxxxxxxxxxxx Mobile: +91 9538631477 Sitz der Gesellschaft: Bochum Handelsregister: Amtsgericht Bochum, HRB 17519 Geschäftsführung: Sebastian Deutsch, Eray Basar Datenschutzhinweise nach Art. 13 DSGVO On Tue, 6 Dec 2022 at 23:15, Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> wrote: > > Hi Guenter, Rob > > On 29-11-2022 10:11 pm, Guenter Roeck wrote: > > On 11/29/22 08:34, Uwe Kleine-König wrote: > >> On Tue, Nov 29, 2022 at 05:11:34PM +0100, Naresh Solanki wrote: > >>> Add pwm support for max6639. Also configure pwm fan speed based on pwm > >>> provided in DT. > >> > >> Did you do anything to resolve the questions I had in reply to v5? If > >> yes, I must have missed it. > >> > > > > I don't see a response to my concerns either, especially regarding fan mode > > (dc vs. pwm) in the bindings. For that reason, I won't even look at the > > series. > Best I can think of regulator with voltage control. Because as per my > understanding, DC control fan essentially control DC voltage on negative > pin of fan. > > > Regards, > Naresh > > > > Guenter > > > >> Note that maintainer time is scarce and with sending new versions of a > >> patch with no sign that you improved in the aspects that were critized > >> before, you're burning that scarce time and loosing the good will of the > >> responsible maintainers. > >> > >> Best regards > >> Uwe > >> > >
